Numerical Study of a High Temperature Latent Heat Storage (200-300oC) Using Eutectic Nitrate Salt of Sodium Nitrate and Potassium Nitrate
C.W. Foong, J.E. Hustad, J. Løvseth, and O.J. Nydal
Department of Energy and Process Engineering, Norwegian University of Science and Technology, Trondheim, Norway
In this study, a small scale direct solar thermal energy storage system with secondary reflector is designed and developed. The main advantage of thermal energy storage is that cooking can be carried out during the time when there is little or no sun shine. In addition, no heat transport fluid is needed in this system. A well insulated heat storage should keep the heat for about 24 hours. KNO3 ...
Enthalpy Porosity Method for CFD Simulation of Natural Convection Phenomenon for Phase Change Problems in the Molten Pool and its Importance during Melting of Solids
Priyanshu Goyal, Anu Dutta, V.Verma, I. Thangamani, R.K. Singh
Bhabha Atomic Research Centre, Mumbai, India
Shielded transportation casks are commonly used for transportation and storage of radioactive waste materials. Design approval of such casks by regulatory authority is subject to its compliance with a thermal test (among other tests) Due to exposure of cask to fire , there is a possibility of melting of the shielding material (lead) used for the cask and need to evaluate extent of melting. ...
M. Rahman , N. R. Schott , L. K. Sadhu ,
 North South University, Dhaka, Bangladesh
 Department of Plastics Engineering, University of Massachusetts - Lowell, Lowell, MA, USA
 IRays Teknology Ltd., Dhaka, Bangladesh
In a commercial 3D printer head, plastic ribbon passes through a hot nozzle of an extruder to dispense liquid plastic droplets to construct the model. In this paper a 2D axisymmetric model of a 3D head is considered to study the secondary transition change from below the glass temperature to above the glass-transition temperature of ABS (Acrylonitrile Butadiene Styrene) using COMSOL ...
S. Sharma , Y. Pachuary , S. N. Akhtar , J. Ramkumar ,
 Indian Institute of Technology Kanpur, Kanpur, India
 Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, India
 Integral University, Lucknow, India
Laser drilling of titanium and its alloys is widely used in aerospace industry, as it offers selective removal of material at high accuracy and speed. However, laser drilling often inherits defects such as large heat affected zone, micro cracks and recast layer. These defects depend upon complex melting and solidification phenomena happening due to interaction of high-intensity laser with the ...
D. Groulx, and R. Murray
COMSOL Multiphysics can be used to model a latent heat energy storage system. A 2D numerical study was performed to simulate melting of a PCM including both conduction and convective heat transfer. The heat transfer in fluids and laminar flow physics interfaces were used. To model natural convection, proper volume force was applied to the PCM. The viscosity was input as a piecewise, continuous ...
Z. Zheng, R. Zhang
Corning Incorporated, Corning, NY, USA
Introduction: Glass relaxation occurs in a range of temperature during transition from equilibrium to super-cooled liquid. Viscoelastic material model can be applied to simulate glass behavior during the glass transition regime and to predict the glass deformation and stress evolution. Viscoelasticity is the property of materials that exhibit both viscous and elastic characteristics when ...
Bruno Chine' , Manuel Francisco Mata , Ivan Vargas ,
 School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
 School of Electromechanics Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
 School of Physics, Costa Rica Institute of Technology, Cartago, Costa Rica
Plasma torches are used in processing of materials and in energy industry for producing plasma. In a non-transferred arc plasma torch, an electric arc can be glowed by applying a direct current (DC) between the cathode and anode, both placed inside the torch. Then, the plasma (Fig. 1) is obtained by heating, ionizing and expanding a working gas, introduced into the chamber of the torch upstream ...
B. Patidar ,
 Bhabha Atomic Research Centre, Mumbai India
Induction heating is multiphysics process, which includes electromagnetic induction and heat transfer. Both the physics are nonlinearly coupled with each other. In this paper, mathematical modeling of induction heating of MS tube for elevated temperature NDT application is presented. Mathematical modeling of electromagnetic field is done by using magnetic vector potential formulation. Heat ...
R. Kiflemariam, M. Almas, C. Lin
Department of Mechanical & Materials Engineering, Florida International University, Miami, FL, USA
2D steady state heat conduction-electric current model was created in COMSOL Multiphysics® software to study the performance of thermoelectric generator-photovoltaic-thermal (TEG-PVT) system. Four different cases were studied in the paper. In case 1, PV cells without concentrator was simulated while in case 2, concentrator ratio range from 2 to 5 was utilized, In case 3, the convection heat ...
T. G. Zielinski 
 Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw, Poland
Many of fibrous materials are very good sound absorbers, because the acoustic waves, which propagate in air and penetrate a fibrous layer, interact with the fibers so that the wave energy is dissipated. The dissipation is related to some viscous and thermal effects occurring on the micro-scale level. On the macroscopic level, a fibrous medium can be treated as an effective inviscid fluid, ...