Technical Papers and Presentations
Simulation of a Micro-Analytical Device for Adsorbing Substances from a Fluid
R. Winz1, A. de los Rios Gonzalez2, E. von Lieres3, M. Schmittel2, and W. Wiechert1
1Department of Simulation, University of Siegen, Siegen, Germany
2Department of Organic Chemistry, University of Siegen, Siegen, Germany
3Institute of Biotechnology, Research Centre Jülich, Jülich, Germany
T- or Y-shaped microfluidic channels are chemical measurement devices that have become popular in recent years. Using such microdevices gives a better control of the fluid behavior and the chemical reaction kinetics, due to the small quantity of fluid.The concept of the T-Sensor as state-of-the-art is used to determine coupled processes of diffusion and reaction within a small-scaled system on a ...
Mathematical Modeling of Atheroma Plaque Deformation using COMSOL Multiphysics
N. El Khatib1, S. Genieys1, M. Zine2, and V. Volpert1
1Institut Camille Jordan, Université Claude Bernard, Lyon, France
2Département Maths & Informatique, Ecole Centrale de Lyon, Lyon, France
The development of atherosclerosis leads to the formation of an atheroma plaque which takes place in the artery. This plaque is composed of two parts: a lipid deposit and a fibrous cap. The fibrous cap covers the lipid deposit and isolates it from the blood flow. The blood flow that circulates in the artery modifies the geometry of the atheroma plaque and can cause dangerous effects, such as a ...
Multidimensional Modeling of a Toxical Molecule Formation during Food Frying
G. Carrieri, M. V. De Bonis, and G. Ruocco
CFDfood - DITEC, Università degli studi della Basilicata, Potenza, Italy
Heat related processing can have various effects on food and food ingredients. Besides the intended effects to improve safety and quality of the products, undesired changes, nutritional or toxicological, can also occur. In this area, acrylamide formation occupies an important role, as this molecule has been considered as a potential cause of cancer. The possibility that this molecule may be ...
Implementation of EC-NDT for in Depth Detection of Defects in Metallic Plates
M. Cacciola, S. Calcagno, D. De Carlo, F. Laganà, G. Megali, F. C. Morabito, D. Pellicanò, and M. Versaci
Department of Informatics, Mathematics, Electronics and Transportations (DIMET) - "Mediterrane" University of Reggio Calabria, Reggio Calabria, Italy
Eddy Current Non Destructive Testing is exploited to evaluate the structural integrity of metallic objects. The aim of this paper is to detect defects located in depth within the inspected object; within this framework, we studied the modelling of exciting coils useful to detect structural flaws. The simulations have been carried out by considering the movement of the coil over a structural steel ...
Modeling Solute in Clays at the Nanometric Scale Part I. Application to the Alcaline Series
N. Diaz1, F. Goutelard1, and P.Turq2
1CEA/DEN/DPC/SECR/L3MR, CEN Saclay, Gif-sur-Yvette, France
2LI2C, Université Pierre et Marie Curie, Paris, France
The argillite formation has been proposed as a potential host rock for deep radioactive waste disposal. These materials have very low permeability and diffusion is likely to be the predominant transfer mechanism for solute migration.The negatively charged surface of the clays induces unexpected behaviour of the ions: while the anions diffuse slower than HTO, the transport of the cations is ...
Effective Permittivity and Optical Properties of Photonic/Plasmonic Structures in Nanocomposite Glass
O. Kiriyenko, W. Hergert, S. Wackerow, and H. Graener
Institut für Physik, Naturwissenschaftliche Fakultät II, Martin-Luther-Universität Halle-Wittenberg, Halle, Germany
In this presentation, we study the optical properties of different photonic structures.
Vibration Analysis - Gullfaks C Knock Out Drum
S. Sandström
SSM Engineering, Stenungsund, Sweden
An eigenvalue as well as a harmonic response analysis is performed on the Gullfaks C, Knock Out Drum (KOD) including some of the connecting pipe systems. The vibration behavior of two new choke valves and their specific connection to the KOD are of special interest. The main concern is the low frequency induced vibration as a consequence of the platform movements. A frequency band between 0-20 Hz ...
3D Finite Element Models of Ground Deformation and Stress Field in a Viscoelastic Medium
D. Scandura1,2, G. Currenti1, and C. Del Negro1
1Istituto Nazionale di Geofisica e Vulcanologia, Sezione di Catania, Catania, Italy
2Dipartimento di Matematica e Informatica, Università di Catania, Catania, Italy
A 3D finite element model was used to evaluate the time dependent ground deformation and the stress change caused by a pressure source embedded in a viscoelastic medium. In volcanic areas, the presence of inhomo-geneous materials and high temperatures produce a lower effective viscosity of the Earth's crust which calls for consideration of the thermal regime of crustal volume surrounding the ...
A non-Conventional use of COMSOL to Solve a Complex 3D Geometrical Problem
J. P. Caire, and F. Jomard
LEPMI, ENSEEG, Saint Martin d'Hères, France
The purpose of this study was the optimization of an industrial furnace from a thermal point of view. Such a cylindrical furnace contains an Al-Mg molten alloy covered by a KCl-NaCl molten salt layer floating on it to prevent alloy evaporation. When tilting the cylindrical furnace, it was necessary to compute the relation between the salt and alloy volumes and the area of the liquid alloy/salt ...
