Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

corona discharge

Please login with a confirmed email address before reporting spam

Hello everybody,

I am new in comsol and I try to create a numerical model in comsol to simulate the corona discharge between a very thin tungsten wire (20 micrometer diameter) and a grounded aluminium plate. The two elements were placed in air. Which model should I use ? (PDE, EMES, Electrostatics generalized.....?)

Thank you!


2 Replies Last Post Aug 30, 2011, 1:25 p.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 30, 2011, 9:18 a.m. EDT
Marius,

I presume the plasma module should fit best. However, I don't have it so I cannot give practical advice.

Cheers
Edgar
Marius, I presume the plasma module should fit best. However, I don't have it so I cannot give practical advice. Cheers Edgar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Aug 30, 2011, 1:25 p.m. EDT
Hi,
If been trying to model corona discharges with comsol too. My advice is that you should start with the tutorial models on the DC plasma to get to know how it works.
To solve a corona discharge the module to be used is the plasma. However, you will face several problems if you have planned to solve an atmospheric pressure discharge.

Good luck!

JH
Hi, If been trying to model corona discharges with comsol too. My advice is that you should start with the tutorial models on the DC plasma to get to know how it works. To solve a corona discharge the module to be used is the plasma. However, you will face several problems if you have planned to solve an atmospheric pressure discharge. Good luck! JH

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.