Menu

Discussion Forum

New Discussion
Filter

Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Out of memory xmesh processing

Posted Apr 23, 2011, 8:03 p.m. EDT Version 4.1 1 Reply

Xiaoyi Yu
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

What's the meaning of this error "out of memory xmesh processing", and how to fix it? Thank you!
1 Reply Last Post Apr 24, 2011, 2:46 a.m. EDT
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)
Send Private Message Flag post as spam

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Apr 24, 2011, 2:46 a.m. EDT
Hi

for me that means either add more RAM (if possible) or reduces the number of elements in your mesh to be more compatible with your available RAM

--
Good luck
Ivar
Hi for me that means either add more RAM (if possible) or reduces the number of elements in your mesh to be more compatible with your available RAM -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.

Suggested Content