Model Gallery

The Model Gallery features COMSOL Multiphysics model files from a wide variety of application areas including the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use models and step-by-step instructions for building the model, and use these as a starting point for your own modeling work. Use the Quick Search to find models relevant to your area of expertise, and login or create a COMSOL Access account that is associated with a valid COMSOL license to download the model files.

Ammonia Synthesis PFR

This example demonstrate the modeling of a plug flow reactor for the synthesis of ammonia in the Haber-Weiss process. The catalytic reactor in this process operates under non-isothermal conditions, where temperature and pressure varies substantially along the length of the reactor, in addition to the variation in composition.

Mechanics of Golf Swing

How well you can strike a golf ball is not only determined by your muscle strength, but more importantly it is influenced by the mechanics of golf swing. The outcome of golf stroke is basically determined by the movement of the club head just prior to the impact with the ball. In this example, a multibody analysis of a golf swing is performed. Aim of the analysis is to maximize the club head ...

A Molten Carbonate Fuel Cell Cathode

The fuel cell presented in this example is the Molten Carbonate Fuel Cell (MCFC), a high temperature fuel cell for stationary applications. The fuel is oxidized at the anode, and can be either hydrogen or natural gas, while oxygen is reduced at the cathode together with carbon dioxide. The electrolyte is defined in the porous electrode and in the free electrolyte, while the solid phase is ...

Tapered Membrane End Load

This example shows a 2D plane stress model of a membrane with a thickness of 0.1 m. The load is a uniformly distributed horizontal load of 10 MN/m (that is, a pressure of 100 MPa) along the right end. At the left end, the membrane is constrained from movement in the x direction. At the left end's midpoint, the membrane is kept fixed. The resulting x-direction stress is compared to a NAFEMS ...

Electrochemical Glucose Sensor

Electrochemical glucose sensors use amperometric methods to measure the concentration of glucose in a sample. This example models the diffusion of glucose and ferri/ferrocyanide redox mediators in a unit cell of electrolyte above an interdigitated electrode. The sensor gives a linear response over a suitable range of concentrations. The Electroanalysis interface is used to couple the chemical ...

An Electrokinetic Valve in a Microchannel System

This model presents an example of pressure driven flow and electrophoresis in a microchannel system. The modeled device is often used as an electrokinetic sample injector in biochips with well-defined sample volumes of dissociated acids and salts. The model presents a study of a pinched injection cross valve during the focusing, injection, and separation stages. Focusing is obtained through ...

Optimization of a Tuning Fork, Modeled with LiveLink for Inventor

This model computes the fundamental eigenfrequency and eigenmode for a tuning fork that is synchronized from Inventor via the LiveLink interface. The length of the fork is then optimized so that the tuning fork sounds the note A, 440 Hz.

Modeling a Distributed Model of Thermal Microactuator on a Cluster

A model of a thermal microactuator requires the coupled simulation of electric current conduction with heat generation, heat conduction, and structural stresses and strains due to thermal expansion. The purpose of this model is to demonstrate how to access the cluster computing functionality in COMSOL from COMSOL Desktop and use it to submit a batch job to a cluster through a job scheduler. The ...

Image Import: Homogenized Pore Scale Flow and Thermal Conduction

You can now use image data to represent 2D material distributions or to identify regions with different materials by their color or gray scale. Images used in this way can have many origins such as scanning electron microscope (SEM), computed tomography (CT), or magnetic resonance imaging (MRI). An important application of image import is for easy computation of equivalent volume-averaged ...

How to Use Contour Line in Geometry

This presentation gives instructions on how to export a Contour Plot (single line), re-import it as an Interpolation Curve on a Work Plane in the Geometry, extrude the Work Plane, then Convert to Solid to create two domains separated by the new surface.

Quick Search