Note: This discussion is about an older version of the COMSOL Multiphysics® software. The information provided may be out of date.

Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

PZT - Aluminum BC

Please login with a confirmed email address before reporting spam

What boundary condition should I select for the Boundary between Aluminum and PZT, so that vibrations generated in Aluminum gets transferred to the PZT

3 Replies Last Post Dec 23, 2011, 4:01 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 22, 2011, 5:54 a.m. EST
Hi

the default solid continuity should do the job, if you are in assembly mode you need to apply a pair solid continuity

--
Good luck
Ivar
Hi the default solid continuity should do the job, if you are in assembly mode you need to apply a pair solid continuity -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 22, 2011, 6:16 a.m. EST
Hi,
I tried adding continuity, but it somehow doesnt get selected
Do you think, I should create a union between the two geometries?
Hi, I tried adding continuity, but it somehow doesnt get selected Do you think, I should create a union between the two geometries?

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Dec 23, 2011, 4:01 a.m. EST
Hi

you will only get defaqult continuity on internal boundaries for the same physics, when you mix several physics on some but not all boundaries, the handling of internal/external bondaries can become cumbersome, then working in assembly and or union, and cleverly grouping your domins with an explicit geoemtrical union might help.

But also I strongly recommend to use a newer version, v4.0 was the first issue ofter a major change everythng was not ironed out. I would say from 4.2 his is the case ,we have now a more advanced tool than th older 3.5a

--
Good luck
Ivar
Hi you will only get defaqult continuity on internal boundaries for the same physics, when you mix several physics on some but not all boundaries, the handling of internal/external bondaries can become cumbersome, then working in assembly and or union, and cleverly grouping your domins with an explicit geoemtrical union might help. But also I strongly recommend to use a newer version, v4.0 was the first issue ofter a major change everythng was not ironed out. I would say from 4.2 his is the case ,we have now a more advanced tool than th older 3.5a -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.