Application of System Identification Methods to Implement COMSOL Models into External Simulation Environments
A.W.M. van Schijndel and M. Gontikaki
Eindhoven University of Technology, Eindhoven, The Netherlands
Full coupling of distributed parameter models, like COMSOL, with the lumped models often lead to very time-consuming simulation duration times. In order to improve the speed of the simulations, the idea of using system identification methods to implement the distributed parameters models of COMSOL into external simulation environments, is explored. It is concluded that the system identification ...
Coupled Hydro-Mechanical Analysis of Excavation Damaged Zones around an Underground Opening in Sedimentary Rock
H. Abdi, E. Evgin, M. Fall, T.S. Nguyen, and G. Su
University of Ottawa, Ottawa, ON, Canada
Canadian Nuclear Safety Commission, Ottawa, ON, Canada
A large amount of research work has been carried out in many countries to determine the viability of radioactive waste disposal in deep geological repositories. It is well known that excavation can cause damage around underground openings. On the other hand, the mechanical damage can influence the stability of the opening and the flow characteristics of the rock mass. In addition, all physical ...
O. Richter, F. Suhling, and S. Moenickes
Technische Universität Braunschweig, Germany
The spatial dynamics of the invasion of new species and genetic dispersal is studied under the presumption of rising temperature by using a coherent approach of coupled partial differential equations of the reaction diffusion type. The nonlinear reaction terms model the population dynamics, genetic exchange and competition. Temperature reaction norms of reproduction rates are conferred by a two ...
Israel Military Industry, Ramat-Hasharon, Israel
Because of its high enthalpy of combustion, aluminum has been added to energetic materials. In this paper, a two dimension thermal model is developed and assessed to describe the interrelated processes of Aluminum particle oxidation by using the software COMSOL Multiphysics. The thermal model consists of thermal radiation, forced convection and thermal conduction and oxygen diffusion. It is ...
Chemical Leachate Simulation for Environmental Safety Evaluation in Civil Engineering Applications of Construction Byproducts
National Institute for Environmental Studies, Tsukuba, Japan
This presentation shows a numerical simulation model of the chemical leachate process from construction byproducts and the chemical transport process with geochemical reactions for their environmental safety evaluation.
Non-Equilibrium Quantum Well Populations and Optical Characteristics of III-Nitride Lasers and Light-Emitting Diodes
M. Kisin, and H. El-Ghoroury
Ostendo Technologies, Inc.
COMSOL-based Ostendo’s Optoelectronic Device Modeling Software (ODMS) has been updated to include effects of non-equilibrium QW populations in semiconductor light-emitting and laser diodes. III-nitride light emitters with different levels of polarity have been compared as an illustrative example of ODMS performance. Modeling proved that high intra-QW recombination rates in III-nitride light ...
C. Gavrila, C. P. Lungu, and I. Gruia
Technical University of Civil Engineering Bucharest, Romania
National Institute for Laser, Plasma and Radiation Physics, Bucharest, Romania
University of Bucharest, Faculty of Physics, Bucharest, Romania
The purpose of this paper is to present a numerical modeling of plasma phenomena in beryllium emissions using COMSOL Multiphysics software. The Beryllium films were deposited on mirror polished fine grain graphite substrates using the Thermionic Vacuum Arc (TVA) technology available at NILPRP – Magurele, Romania. The developed system for thin film deposition using thermionic vacuum arc (TVA) ...
A. Egedy, T. Varga, and T. Chován
University of Pannonia
Department of Process Engineering
With detailed hydrodynamic modelling of a system the critical parameters and operation limits can be determined. In the field of fluid dynamic and reactor engineering one of the most important aspects is the practical knowledge of future engineers and technicians. In our research several different reactor constructions and impeller configurations were modelled to achieve a better ...
Shape Optimization of Electric and Magnetic System using Level Set Technique and Sensitivity Analysis
Y. Sun Kim, A. Weddemann, J. Jadidian, S. Khushrushahi, and M. Zahn
Dept. of Electrical Engineering and Computer Science
The classical optimization method has been applied to many design problems for electromagnetic systems. One of its major difficulties is related to meshing problems arising from shape modifications. In order to circumvent these kinds of technical difficulties with moving mesh problems, several researches have tried to formulate shape optimization with fixed mesh analyses based on fixed grid ...
S. Anyyeva, and K. Kunisch
Institute of Mathematics and Scientific Computing
Karl Franzens University
We treat a gradient constrained minimization problem which has applications in mechanics and superconductivity. A particular case of this problem is the elastoplastic torsion problem. In order to solve the problem we developed an algorithm in an infinite dimensional space framework using the concept of the generalized Newton derivative. The Desktop environment of COMSOL Multiphysics 4.1 was ...