Here you will find presentations given at COMSOL Conferences around the globe. The presentations explore the innovative research and products designed by your peers using COMSOL Multiphysics. Research topics span a wide array of industries and application areas, including the electrical, mechanical, fluid, and chemical disciplines. Use the Quick Search to find presentations pertaining to your application area.

Computational Modeling of the Electrohydrodynamics Influencing Trace Mercury Adsorption within Electric Utility Electrostatic Precipitators

H. Clack[1]
[1]University of Michigan, Ann Arbor, MI, USA

Anthropogenic mercury (Hg) emissions increase the risk of neurological and neonatal health effects in humans through fish consumption. There are several technological approaches to controlling mercury emissions from coal combustion, including the injection of a powdered mercury sorbent into the flue gas upstream of the particulate control device (PCD). As most PCDs are electrostatic ...

Generation of Lofted NURBS Curves for 3D Model Generation with COMSOL Multiphysics®

R.T. Hart[1]
[1]Department of Biomedical Engineering, The Ohio State University, Columbus, OH, USA

A key challenge to finding quantitative solutions to biological problems is to model the complex 3D geometry of naturally occurring structures. Model generation often starts from serial sections from CT or MRI scans, confocal microscopy, or physical sectioning. In addition, prior to V4 of COMSOL Multiphysics®, there was a "loft" command to allow construction of 3D models from serial sections ...

Towards Optimized Neural Stimulation in a Device for Urinary Incontinence

A.N. Shiraz[1], A. Demosthenous[1]
[1]E&EE Department, University College London, London, United Kingdom

After spinal cord injury (SCI) the functions of the lower urinary tract are often disrupted and may have fatal consequences for the patient. It has been shown that using a transrectal probe developed by Craggs et al., through conditional transrectal stimulation of pudendal nerve, it is possible to treat hyperreflexia in some of the SCI patients. To maximise the efficacy of this type of ...

Modeling of Charge Transport in Ion Bipolar Junction Transistors

A.V. Volkov[1], K. Tybrandt[1], I.V. Zozoulenko[1], M. Berggren[1]
[1]Organic Electronics, ITN, Linköping University, Norrköping, Sweden

Modeling of an ion bipolar junction transistor (IBJT) is performed using the COMSOL Multiphysics® software. Our model describes the IBJT which was developed and characterized [1]. The IBJT under consideration consists of an anion-selective collector and emitter, a cation-selective base and a neutral junction. The physical model is based on Poisson and Nernst-Planck (PNP) equations. A two ...

Optimization of a Rotor Shape for Spherical Actuator with Magnetically Levitating Rotor to Match Octupole Field Distribution

M. Sidz[1], R. Wawrzaszek[1], L. Rossini[2], A. Boletis[3], S. Mingard[3], K. Seweryn[1], E. Onillon[2], M. Strumik[1]
[1]Space Research Centre of PAS, Warsaw, Poland
[2]CSEM Centre Suisse d’Electronique et de Microtechnique SA, Neuchâtel, Switzerland
[3]Maxon Motor AG, Sachseln, Switzerland

The use of a reaction sphere as an actuator used by satellite Attitude Control System was proposed over twenty years ago. In principle this concept assumes the use of a single reaction sphere which can be accelerated in any direction instead of a set of reaction wheels. The solution discussed in this work has been proposed and patented by CSEM company. Contrary to conventional ball bearing ...

3D-FEA of the Relationship between the Occiput and Sphenoid in the Osteopathic Paradigm - new

Y. Chiesa[1]
[1]Istituto Superiore di Osteopatia, Milan, Italy

The concept of cranial Primary Respiratory Mechanism (MRP) is used by osteopathic practitioners to explain the perceptual characteristics arising from the clinical palpation approach of the human skull. The theoretical apparatus and the same MRP existence is always element of controversy among the scientific community. The results arising from this study highlight the intrinsic capability of ...

Dependence of the Current Density Distribution with Flow Channel Geometry in a Half-Cell Model - new

O. Beruski[1], J. Perez[1]
[1]Institute of Chemistry of São Carlos, São Carlos, SP, Brazil

The present work demonstrates that a simple half-cell model is capable of reproducing qualitatively the main features of the measurements of the current density distribution in a high-temperature polymer electrolyte fuel cell, pointing that computational modeling and simulation are an important tool in the development of such devices. Our main interests with such a model is to optimize working ...

Microvascular Dysfunction in PAD Patients - new

K. Cluff[1], H. Mehraein[1], B. Jayakumar[2]
[1]Department of Bioengineering, Wichita State University, Wichita, KS, USA
[2]Department of Industrial & Manufacturing Engineering, Wichita State University, Wichita, KS, USA

Background: Peripheral arterial disease (PAD) is characterized by atherosclerotic blockages of the arteries supplying the lower extremities, which cause a progressive accumulation of ischemic injury to the skeletal muscles of the lower limbs. Despite revascularization treatment intervention some PAD patients require follow up secondary treatment due to a continued decline in limb function, ...

The Spherical Design Algorithm in the Numerical Simulation of Fiber-Reinforced Biological Tissues

M. Carfagna [1], A. Grillo [1],
[1] Dipartimento di Scienze Matematiche, Politecnico di Torino, Italy

The numerical results of the unconfined compression test on a sample of Articular Cartilage (AC) are discussed. AC is modelled as a load-bearing, deformable, fiber-reinforced material filled with an interstitial fluid and comprising statistically oriented collagen fibers, chondrocytes, and a matrix of proteoglycans. A strain energy is assigned to characterize the mechanical behavior of the ...

Molecular Hydrogen Tracking in an Electrolytic Polishing Process

L. M. A. Ferreira [1],
[1] CERN, Geneva, Switzerland

In a water based electrolytic polishing process, the formation of molecular hydrogen at the cathode is unavoidable and it can contribute to the formation of surface defects at the anode side. This paper presents the work to model and simulate the molecular hydrogen flow inside radio frequency cavity geometries and compares it with the presence, type and relative position of certain defects in ...