B. Marmo, and B. Carruthers
Reactec Ltd., Edinburgh, United Kingdom
The onshore wind turbine industry must overcome many technical, commercial, and environmental difficulties. A significant element for planning consent is operational noise. Acoustic limits are strictly enforced and can lead to near-neighbour complaints as well as contractual disputes. Reactec have diagnosed, analysed and solved a problematic tonal resonance for a major wind turbine generator ...
L. Santandrea, and Y. Le Bihan
Laboratoire de Génie Electrique de Paris, Gif-sur-Yvette, France
Eddy current testing (ECT) is widely used to check the integrity of electrically conducting parts and notably to detect flaws. It is based on the interaction between a probe and the part under testing. The finite element method (FEM) is well fitted to the modelling of these kinds of problems because of its large flexibility which allows to deal with complex probe and part configurations. In this ...
Y. Pennec, Y. El Hassouani, C. Li, B.D. Rouhani, E.H. El Boudouti, H. Larabi, and A. Akjouj
Institut d’Electronique, de Microélectronique et de Nanotechnologie, Université de Lille, Villeneuve d’Ascq, France
Phononic crystals are a class of materials that exhibit periodic variations in their density and elastic properties. Such crystals modify the propagation of acoustic waves and prohibit the propagation of sound for frequencies within the band gap. We discuss the simultaneous existence of phononic and photonic band gaps in a periodic array of silicon pillars deposited on a homogeneous SiO2 ...
E. Holzbecher, W.L. Wah, and M-S. Litz
Georg-August Universität Göttingen, Germany
Freie Universität Berlin, Germany
There are various alternative options concerning modeling fluid flow within fractures in porous media. We give a general overview, with remarks concerning the modeling using COMSOL Multiphysics. Moreover we define and study two test cases for intercomparison. Finally for one of the testcases some results of an extensive sensitivity study is presented.
L. Spicci, and M. Cati
Esaote SpA, Florence, Italy
The technology involved in high performance ultrasound imaging probes needs a reliable model to help in new projects development and performance simulations. To achieve a useful model, it is necessary to use correct values for all material parameters involved in the electro-acoustical performances of the piezoelectric material, but unfortunately some of these parameters are known only with high ...
S. Francois, and P. Namy
Nexans Research Center, Lyon cedex, France
SIMTEC, Grenoble, France
Power over Ethernet (PoE/PoE+) is a technology allowing to transmit data and power over the same data cable. The major concern for this technology is the degradation of data transmission performances due to the temperature increase in the cable. To have a better quantitative and qualitative knowledge of the temperature field in the cables, Nexans has developed a 2D finite element thermal model ...
S. Gerbino, and P. Franciosa
University of Molise, School of Engineering, Via Duca degli Abruzzi, Termoli, Italy
Understanding the stress-strain behavior of human foot tissues and pressure map distributions at the plantar interface is of interest into biomechanical investigations. In particular, monitoring plantar pressure maps is crucial to establishing the perceived human comfort of shoe insoles. A 3D anatomical detailed FE human foot model was created, starting from CT (Computer Tomography) scans of a ...
A. Shoory, A. Smorgonskiy, and F. Vega
Electromagnetic Compatibility (EMC) group, Swiss Federal Institute of Technology (EPFL), Lausanne, Switzerland
In this paper, we will present simulation results obtained using COMSOL RF module for the current along a wire antenna in both frequency and time domains. The structure is excited through a lumped (voltage or current) source at its center. For the frequency domain simulations we compare the results with the Numerical Electromagnetics Code (NEC-4) and for the time domain results we compare them ...
S. Oukach, M. Elganaoui, B. Pateyron, and H. Hamdi
Laboratoire des Sciences des Procèdes Céramiques et de Traitements de Surface SPCTS, Limoges, France
Laboratoire de Mécanique des Fluides et Energétique LMFE, Marrakech, Morocco
The quality of coatings obtained by means of thermal spraying depends strongly on the mechanism of the interaction between the molten droplets and the surface to be covered. The aim of the present study is to simulate the impact of a droplet onto a substrate, in order to have a good understanding of the dynamics of droplets impact. In this study, the process of droplet spreading is described; the ...
J. Berthier, R. Renaudot, P. Dalle, G. Blanco-Gomez, F. Rivera, P. Caillat, and V. Agache
CEA-LETI, Grenoble, France
With the current trend towards always more complexity associated to more functionalities in biotechnological systems, it is required to know with accuracy the pressure drop in the circuitry of microfluidic systems. In general, a full three-dimensional calculation is not tractable due to the limited capacity of the computers. However, computational models can help to produce pressure drop ...