3D Simulations of an Injection Test Done Into an Unsaturated Porous and Fractured Limestone

A. Thoraval1 Y. Guglielmi2 F. Cappa3
1INERIS, Nancy, France
2CEREGE, Aix-en-Provence, France
3GEOAZUR, Valbonne, France
A Mathematical Tool for Studying Drug Delivery to the Eye in Case of Glaucoma

P. Silva1 J.A. Ferreira2 P. de Oliveira2
1Coimbra Institute of Engineering, CMUC, Coimbra, Portugal
2Department of Mathematics University of Coimbra, CMUC, Coimbra, Portugal
A Model of Electric Field Assisted Capillarity for the Fabrication of Hollow Microstructures

C. Tonry1 M. K. Patel1 C. Bailey1 M. P.Y. Desmuliez2 W. Yu3
1Computational Mechanics and Reliability Group (CMRG), School of Computing and Mathematical Sciences, University of Greenwich, London, United Kingdom
2Microsystems Engineering Centre (MISCEC, School of Engineering & Physical Sciences, Heriot Watt University, Earl Mountbatten Building, Edinburgh, United Kingdom
3State Key Laboratory of Applied Optics, Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun, Jilin, China
A Multiscale-Multiphysics Model for Axon Pathfinding Simulation, the Example of the Olfactory System

G. Naldi1 G. Aletti1 P. Causin1
1Dipartimento di Matematica ‘F. Enriques’, Università degli Studi di Milano, Milano, Italy
Acoustic-Structure Interaction Modeling of Piezoelectric Transducer in Fluid Medium

V.M. Acosta1 E. Riera1 G. Rodriguez1 A. Pinto1 A. Cardoni2 J.A. Gallego-Juárez1
1Power Ultrasonics Group, CSIC, Serrano, Madrid, Spain
2Pusonics, Arganda del Rey, Madrid, Spain
Acoustical Design of Stethoscope for Improved Performance

C. Thiagarajan1 Gururajan R.2 A. H. Baig2 Prema S.3
1ATOA Scientific Technologies Pvt Ltd, Whitefield, Bangalore, Karnataka India
2University of Southern Queensland, Toowoomba Qld 4350, Australia.
3RMK Engineering College, Chennai, Tamil Nadu, India
Ampacity Simulation of a High Voltage Cable Used in Offshore Wind Farms

E. Pelster1
1Wenger Engineering, Ulm, Germany
An Integrated Numerical-Experimental Approach for Heat Transfer Analysis of Industrial Furnaces

G. Petrone1 A. Adorisio2 S. Adorisio2 M. Calderisi3 A. Cecchi3 M. Scionti1 F. Turchi3
1BE CAE & Test, Catania, Italy
2Gadda Industrie, Ivrea, Italy
3Laboratori Archa, Pisa, Italy
Analysis & Design Optimization of Laterally Driven PolySilicon Electro-thermal Microgripper for Micro-objects Manipulation

T. Pahwa1 S. Gupta1 V. Bansal1 R. Narwal1 B. Prasad1 D. Kumar1
1Electronic Science Department, Kurukshetra University, Kurukshetra, India
AO@SW with Vrala: Simulations and Tests

C. Del Vecchio1 G. Agapito1 L. Carbonaro1 F. Marignetti2 E. De Santis2 Y. Coia2
1National Institute for Astrophysics, Arcetri Astrophysical Observatory, Firenze, Italy
2University of Cassino and Southern Latium, Cassino, Italy
Assessing the Potential of Ventilated Facades on Reducing a Buildings’ Thermal Load Using Decoupled COMSOL Simulations

J. van Schijndel1 C. van Dronkelaar1
1Eindhoven University of Technology, Eindhoven, The Netherlands
Calculations of the FMR Spectrum in 1D Magnonic Crystals

M. Mruczkiewicz1 M. Krawczyk1 V.K. Sakharov2 Yu. V. Khivintsev2 Yu. A. Filimonov2 S. A. Nikitov3
1Nanomaterials Physics Division, Faculty of Physics, Adam Mickiewicz University, Poznań, Poland
2Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences (Saratov Branch), Saratov, Russia; Laboratory “Metamaterials”, Chernyshevsky Saratov State University, Saratov, Russia
3Kotel’nikov Institute of Radio Engineering and Electronics, Russian Academy of Sciences, Moscow, Russia; Laboratory “Metamaterials”, Chernyshevsky Saratov State University, Saratov, Russia
Comparison of Heat and Mass Transport at the Micro-Scale

E. Holzbecher1 S. Oehlmann1
1Georg-August Universität Göttingen, Göttingen, Germany
Computation of Capacitance, Inductance, and Potential Distribution of Integrated-Circuit Interconnects for Unshielded Four Conductors with Three Levels Systems

S.M. Musa1 M.N.O. Sadiku1 J.D. Oliver1
1Prairie View A&M University, Prairie View, TX, USA
Computational Modeling and Simulation of the Human Duodenum

B. Hari1 S. Bakalis1 P. Fryer1
1The University of Birmingham, School of Chemical Engineering, Edgbaston, Birmingham, United Kingdom
COMSOL-based Simulations of Criticality Excursion Transients in Fissile Solution

C. Hurt1 P. Angelo2 R. Pevey1
1Department of Nuclear Engineering, University of Tennessee, Knoxville, TN, USA
2Y-12 National Security Complex, Safety Analysis Engineering, Oak Ridge, TN, USA
Conjugate Heat Transfer

J. Crompton1 L. Gritter1 S. Yushanov1 K. Koppenhoefer1
1AltaSim Technologies, Columbus, OH, USA
Constructing COMSOL Models of a Bacteriological Fuel Cell

R. Coker1 J. Mansell1
1NASA - Marshall Space Flight Center, Huntsville, AL, USA
Coupled Heat and Moisture Transfer in Building Components - Implementing WUFI® Approaches in COMSOL Multiphysics

B. Nusser1 M. Teibinger1
1Holzforschung Austria, Vienna, Austria
Coupled Hydrochemical Modeling for the Optimal Design of an In-situ Redox Experiment

P. Trinchero1 J. Molinero1 G. Román-Ross1 A. Nardi1 L.M. De Vries1 T. Karvonen2 P. Pitkänen3
1Amphos 21, Barcelona, Spain
2WaterHope, Helsinki, Finland
3Posiva, Eurajoki, Finland
Coupling Forced Convection in Air Gaps with Heat and Moisture Transfer inside Constructions

M. Bianchi Janetti1 F. Ochs1
1University of Innsbruck, Innsbruck, Austria
Coupling Multiphysics with Geochemistry: The COMSOL-PhreeqC Interface

A. Nardi1 L. M. de Vries1 P. Trinchero1 A. Enrique Idiart 1 J. Molinero1
1Amphos 21, Barcelona, Spain
Deposition of Submicron Charged Spherical Particles in the Trachea of the Human Airways

H.O. Åkerstedt1
1Luleå University of Technology, Luleå, Sweden
Design and Nuclear-Safety Related Simulations of Bare-Pellet Test Irradiations for the Production of Pu-238 in the High Flux Isotope Reactor Using COMSOL

J.D. Freels1 P.K. Jain1 R.W. Hobbs1
1Oak Ridge National Laboratory, Oak Ridge, TN, USA
Design and Simulation of MEMS based Thermally Actuated Positioning Systems

D. Mallick1 P. K. Podder1 A. Bhattacharyya1
1Institute of Radio Physics & Electronics, University of Calcutta, Kolkata, India
Design and Simulation of Piezoelectric Micropump and Microvalve based Drug Delivery System

D. Samajdar1 P. Podder1 A. Bhattacharyya1 S. Sen1
1Institute of Radio Physics and Electronics, University of Calcutta, Kolkata, WB, India
Design Geometry Optimization of Vertical Cracks in Thermal Barrier Coatings from Simulated Thermal and Mechanical Behavior

C. Heveran1 J. Xu1 D. Cole2 S. Basu1 V. Sarin1
1Division of Materials Science and Engineering, Boston University, Brookline, MA, USA
2Department of Mechanical Engineering, Boston University, Brookline, MA, USA
Design Variability of a MEMS Resonator

H. van Halewijn1 J. Beek2
1Physixfactor, Nijmegen, The Netherlands
2NXP, Eindhoven, The Netherlands
Dynamic Simulation of Electrochemical Etching of Silicon with COMSOL

A. Ivanov1 U. Mescheder1
1Furtwangen University, Furtwangen, Germany
Dynamics of a Sessile Droplet Evaporation

G. Marinaro1 A. Accardo1 E. Di Fabrizio1
1Istituto Italiano di Tecnologia, Nanostructures Department, Genova, Italy
Elastoplastic Deformation in a Wedge-Shaped Plate Caused by a Subducting Seamount

M. Ding1 J. Lin2
1MIT/WHOI Joint Program in Oceanography, Cambridge, MA, USA
2Woods Hole Oceanographic Institution, Woods Hole, MA, USA
Electric Field Analysis of a Green Rust Surface Treatment Tank for High/Super Alloys

H.K. Yang1 S.C. Tseng1
1Institute of Mechanical Engineering, National Yunlin University of Science Technology, Taiwan
Electrical and Thermal Analysis of an OLED Module

J. Kundrata1 A. Baric1
1Faculty of Electrical Engineering and Computing, University of Zagreb, Zagreb, Croatia
Electromagnetic Parameters Extraction for Integrated-Circuit Interconnects for Open Three Conductors with Two Levels Systems

S.M. Musa1 M.N.O. Sadiku1 J.D. Oliver1
1Prairie View A&M University, Prairie View, TX, USA
Energetics of Half-Quantum Vortices

K. Roberts1
1University of Illinois at Urbana-Champaign, Urbana, IL, USA
FEM Modeling of Electric Field and Potential Distributions of MV XLPE Cables Containing Void Defect

M. Alsharif1 P. Wallace2 D. Hepburn2 C. Zhou2
1Department of Physics, Faculty of Arts, Sebha University, Sebha, Libya
2School of Engineering & Computing, Glasgow Caledonian University, Glasgow, United Kingdom
FEM-Simulation of a Printed Acceleration Sensor with RF Readout Circuit

H. Schweiger1 T. Göstenkors1 R. Bau1 D. Zielke1
1Dept. Engineering Sciences and Mathematics, University of Applied Sciences Bielefeld, Bielefeld, Germany
Finite Element Analysis of Induced Electroosmotic Flow in Brain Tissue and Application to ex vivo Determination of Enzyme Activity

Y. Ou1 A. Rupert1 M. Sandberg2 S. Weber1
1University of Pittsburgh, Pittsburgh, PA, USA
2University of Gothenburg, Gothenburg, Sweden
Fracture-Matrix Flow Partitioning and Cross Flow: Numerical Modeling of Laboratory Fractured Core Flood

R. Sanaee1 G.F. Oluyemi1 M. Hossain1 B.M. Oyeneyin1
1Robert Gordon University, Aberdeen, United Kingdom
Heat and Mass Transfer in Reactive Multilayer Systems (RMS)

M. Rühl1 G. Dietrich2 E. Pflug1 S. Braun2 A. Leson2
1TU Dresden, Laser and Surface Technology, Dresden, Germany
2IWS Dresden, Fraunhofer Institute for Material and Beam Technology, Dresden, Germany
Heat and Mass Transfer Modeling During Freezing of Foodstuffs

O. Rouaud1 T. Pham2
1LUNAM Université, ONIRIS, CNRS, GEPEA, UMR, Nantes, France
2University of New South Wales, Sydney, Australia
Heat Transfer Modeling of Steam Methane Reforming

E. Carcadea1 M. Varlam1 I. Stefanescu1
1National Research Institute for Isotopic & Cryogenic Technologies, Rm.Vâlcea, Romania
Heat, Air, and Moisture (HAM) Modeling of Historic Windows

H.L. Schellen1
1Eindhoven University Of Technology, Eindhoven, The Netherlands
Humidity Mass Transfer Analysis in Packed Powder Detergents

F. Zonfrilli1 V. Guida1 L. Scelsi1
1Procter & Gamble Italia, Pomezia, Roma, Italy
Hybrid Design Electrothermal Polymeric Microgripper with Integrated Force Sensor

V. Vidyaa1
1Jawahar Engineering College, Affliated to Anna University, Chennai, Tamil Nadu, India
Implementation of an Isotropic Elastic-Viscoplastic Model for Soft Soils Using COMSOL Multiphysics

M. Olsson1 T. Wood1 C. Alén1
1Division of GeoEngineering, Chalmers University of Technology, Gothenburg, Sweden
Innovating New Products using Multiphysics Modeling

Irrotational Motion of an Incompressible Fluid Past a Wing Section in an Unbounded Region

J. Russell1
1Florida Institute of Technology, Melbourne, FL, USA
Keyhole Formation During Spot Laser Welding: Heat and Fluid Flow Modeling in a 2D Axisymmetric Configuration

M. Courtois1 M. Carin2 P. LeMasson2 S. Gaied 1
1ArcelorMittal, Global R&D, Montataire, France
2LIMATB Laboratory, Université de Bretagne Sud, Lorient, France
Kinetic Investigation of a Mechanism for Generating Microstructures on Polycrystalline Substrates Using an Electroplating Process

T. Soares1 H. Mozaffari2 H. Reinecke1
1Universität Freiburg, Freiburg im Breisgau, BW, Germany
2Hochschule Furtwangen, Tuttlingen, BW, Germany
Laser Activated Gold Nanorods for the Photothermal Treatment of Cancer

F. Rossi1 F. Ratto1
1CNR - Institute of Applied Physics "Nello Carrara", Sesto Fiorentino, Italy
Launcher Design for Chemical Looping Combustion

F. Gao1 D.W. Greve1
1Carnegie Mellon University, Pittsburgh, PA, USA
Low Pt Cathodes for High Performance PEMFCs: Modeling and Experiments

F. Daouda1 J. Hamelin1 P. Benard1 S. Kumar Natarajan 1
1Insitut de recherche sur l'hydrogène, Université du Québec à Trois-Rivières, Trois-Rivières, Québec, Canada
Mathematical Modeling of Plastic Deformation Process with an Eulerian Approach

O. Toscanelli1
1Scuola Superiore S. Anna, Pisa, Italy
Microscale Simulation of Nanoparticles Transport in Porous Media for Groundwater Remediation

F. Messina1 M. Icardi1 D. Machisio2 R. Sethi1
1Politecnico di Torino - DIATI, Torino, Italy
2Politecnico di Torino - DISAT, Torino, Italy
Miscible Viscous Fingering: Application in Chromatographic Columns and Aquifers

S. Pramanik1 G. L. Kulukuru1 M. Mishra1
1Indian Institute of Technology Ropar, Rupnagar, Punjab, India
Modeling a Combined Photovoltaic-Thermal Panel

E. Gutierrez-Miravete1 B. Fontenault2
1Rensselaer Polytechnic Institute, Hartford, CT, USA
2General Dynamics-Electric Boat, Groton, CT, USA
Modeling and Optimization of a Mg-Metal Hydride Rectangular Tank in the Hydriding Process

E.I. Gkanas1 S.S. Makridis1 A.K. Stubos2 A. Lopez3 J. Folch4 G. Noriega4
1Materials for Energy Applications Group, Department of Mechanical Engineering, University of Western Macedonia, Greece
2Environmental Technology Laboratory, Institute of Nuclear Technology and Radiation Protection, NCSR “Demokritos”, Greece
3Universidad Politécnica De Cataluña, Barcelona, Spain
4Cidete INGENIEROS, Barcelona, Spain
Modeling Magnetic Configurations for Improved Separations of Magnetic and Non-Magnetic Materials

S. Khushrushahi1 T.A. Hatton1 M. Zahn1
1Massachusetts Institute of Technology, Cambridge, MA, USA
Modeling of Atmosphere Revitalization

R. Coker1 J. Knox1 K. Kittredge1
1NASA - Marshall Space Flight Center, Huntsville, AL, USA
Modeling of Chloride Transport in Cracked Concrete: a 3-D Image–Based Microstructure Simulation

Y. Lu1 E. Garboczi1 D. Bentz1
1National Institute of Standards and Technology, Gaithersburg, MD, USA
Modeling of DC Discharges in Argon at Low Pressures

V. Gorokhovsky1
1Vapor Technologies, Inc., Longmont, CO, USA
Modeling of Supercapacitor

G. Madabattula1 S. K. Gupta1
1Department of Chemical Engineering, Indian Institute of Science, Bangalore, Karnataka, India
Modeling of the Photo-Mechanical Response of Liquid-Crystal Elastomers

G. Cerretti1 J.-C. Gomez-Lavocat12 K. Vynck1 D.S. Wiersma13
1European Laboratory for Non-Linear Spectroscopy (LENS), University of Florence, Sesto Fiorentino, Italy
2The Institute of Photonic Sciences (ICFO), Mediterranean Technology Park, Castelldefels, Spain
3Istituto Nazionale di Ottica (INO), National Research Council (CNR), Florence, Italy
Modeling of the Reduction Stage during the Continuous Refining of Copper in a Packed Bed Reactor

F. Mansilla1 L. Voisin 2
1Advanced Mining Technology Center, Chile University, Santiago, Chile
2Department of Mining Engineering, Advanced Mining Technology Center, Chile University, Santiago, Chile
Modeling Pit Lake Flooding After Mine Closure

S. Jordana1 A. Nardi1
1Amphos 21, Barcelona, Spain
Modeling the Squeeze Flow of a Thermoplastic Composite Tape during Forming

A. Levy1 G.P. Picher Martel1 P. Hubert1
1McGill University, Montreal, QC, Canada
Modeling, Simulation, and Control of Dual Electromagnet Active Magnetic Levitation

A.K. Piłat1
1AGH University of Science and Technology, Kraków, Poland
Modelization of Photoacoustic Trace Gases Sensors

B. Parvitte1 C. Risser1 R. Vallon1 V. Zéninari1
1GSMA - Université de Reims, Reims, France
Multiphase Transport with Large Deformations Undergoing Rubbery-Glassy Phase Transition: Applications to Drying

T. Gulati1 A. Datta1
1Department of Biological and Environmental Engineering, Cornell University, Ithaca, NY, USA
Multiphysics Between Deep Geothermal Water Cycle, Surface Heat Exchanger Cycle and Geothermal Power Plant Cycle

L.W. Wong1
1International Centre for Geothermal Research, Helmholtz Centre Potsdam, GFZ German Research Centre For Geosciences, Telegrafenberg, Potsdam, Germany
Multiphysics FEM Simulations Approach for Development of a MEMS Heat Generator

G. S. Masi1 S. V. De Guido1 G. Montagna2 C. Martucci2 P. M. Congedo1 L. Vasanelli 1 M. G. Manera2 R. Rella2
1Department of Innovation Engineering, University of Salento, Lecce, Italy
2CNR-IMM, Lecce, Italy
Multiphysics Modeling and Simulation of MEMS based Variometer for Detecting the Vertical Speed of Aircraft in Avionics Applications

K. Umapathi1 K. Sukirtha2 C. Sujitha2 K. A. Noushad2 Venkateswaran1 R. Poornima1 R. Yogeswari1
1United Institute of Technology, Coimbatore, Tamil Nadu, India
2Sri Krishna College of Engineering and Technology, Coimbatore, Tamil Nadu, India
Multiphysics Modeling of a Metal Foam

B. Chinè 13 M. Monno2
1Laboratorio MUSP, Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
2Politecnico di Milano, Dipartimento di Meccanica, Milano, Italy
3Instituto Tecnologico de Costa Rica, Cartago, Costa Rica
Multiphysics Modeling of Spring-Supported Thrust Bearings for Hydropower Applications

F.X. Borràs1 J. Ukonsaari2 A. Almqvist1
1Luleå University of Technology, Luleå, Sweden
2Vattenfall Research and Development, Luleå, Sweden
Multiphysics Modeling of Swelling Gels

A. Lucantonio1 P. Nardinocchi1 L. Teresi2
1Università degli Studi La Sapienza, Roma, Italy
2LaMS - Modelling & Simulation Lab, Università degli Studi Roma Tre, Roma, Italy
Multiphysics Modeling of Warm-Air Drying of Potatoes Slices

S. Sandoval Torres1 A. de Lourdes Allier González1 L.L. Méndez Lagunas1
1Instituto Politécnico Nacional, CIIDIR, Oaxaca, Mexico
Multiphysics Modelling of Standing Column Well and Implementation of Heat Pumps Off-Loading Sequence

A. Nguyen1 P. Pasquier1 D. Marcotte1
1 Department of Civil, Geological and Mining Engineering, École Polytechnique de Montréal, Montréal, QC, Canada
Multiphysics Process Simulation of Static Magnetic Fields in High Power Laser Beam Welding of Aluminum

M. Bachmann1 V. Avilov1 A. Gumenyuk1 M. Rethmeier1
1BAM Federal Institute for Materials Research and Testing, Berlin, Germany
Multiphysics Simulation of a Circular-Planar Anode-Supported Solid Oxide Fuel Cell

K. Daneshvar1 A. Fantino1 C. Cristiani1 G. Dotelli1 R. Pelosato1 M. Santarelli2
1Politecnico di Milano, Dipartimento di Chimica, Materiali e Ingegneria Chimica “G. Natta”, Milano, Italy
2Politecnico di Torino, Dipartimento di Energetica, Torino, Italy
Multiphysics Simulation of the Electrochemical Finishing of Micro Bores

M. Hackert-Oschätzchen1 M. Kowalick1 G. Meichsner2 A. Schubert12
1Chemnitz University of Technology, Chemnitz, Germany
2Fraunhofer Institute for Machine Tools and Forming Technology IWU, Chemnitz, Germany
Multiphysics Simulations for the Design of Probe-Heads Micro-Needles

A. Corigliano1 A. Courard1 G. Cocchetti1 P. Gagliardi1 L. Magagnin1 R. Vallauri2 D. Acconcia2
1Politecnico di Milano, Milano, Italy
2Technoprobe, Cernusco Lombardone, Italy
Multiphysics Simulations in Automotive Product Development: Concept and Beyond

Multiphysics Simulations in the Ultrasonic Industry

P.A. Colombo1
1DepQuest, Dalmine, Italy
Multiphysics Software Applications in Reverse Engineering

W. Wang1 K. Genc2
1University of Massachusetts, Lowell, MA, USA
2Simpleware, Exeter, United Kingdom
Nondestructive Testing of Composites Using Model Based Design

E. Nesvijski1
Numerical Analysis of Conjugate Heat Transfer in Foams

N. Bianco1 R. Capuano1 W.K.S. Chiu2 S. Cunsolo1 V. Naso1 M. Oliviero1
1DETEC, Università degli Studi Federico II, Napoli, Italy
2Department of Mechanical Engineering, University of Connecticut, Storrs, CT, USA
Numerical and Experimental Investigation of Natural Convection Flow of (Sub-) and (Super-) Critical CO2 in Aqueous Phase

R. Khosrokhavar1 G. Elsinga1 R. Farajzadeh2 H. Bruining1
1Delft University of Technology, Delft, The Netherland
2Shell International Global Solutions, Amsterdam, The Netherland
Numerical Calculation of the Dynamic Behavior of Asynchronous Motors with COMSOL Multiphysics

J. Güdelhöfer1 R. Gottkehaskamp1 A. Hartmann1
1Department of Electrical Machines and Electromagnetic Field Theory, University of Applied Sciences Düsseldorf, Düsseldorf, Germany
Numerical Modeling and Performance Optimization Study of a Diaphragm Pump for Medical Application

I. Lupelli1 P. Gaudio1 A. Malizia1 R. Quaranta1
1Department of Industrial Engineering, University of Rome “Tor Vergata”, Roma, Italy
Numerical Modeling of Powder Flow During Coaxial Laser Direct Metal Deposition: Comparison Between Ti-6Al-4V Alloy and 316L Stainless Steel

S. Morville1 M. Carin1 D. Carron1 P. Le Masson1 M. Gharbi2 P. Peyre2 R. Fabbro2
1Université de Bretagne-Sud/UEB-LIMATB, Lorient, France
2PIMM, Arts et Métiers ParisTech, Paris, France
Numerical Simulation of Flow Electrolysers: Effect of Various Geometric Parameters

P. Shukla1 K. K. Singh1 P. K. Gupta 1 S. K. Ghosh1
1Bhabha Atomic Research Centre, Trombay, Mumbai, India
Numerical Simulation of Oil Recovery by Polymer Injection using COMSOL

J. Wegner1 L. Ganzer1
1Clausthal University of Technology, Clausthal, Germany
Numerical Simulation of pH-sensitive Hydrogel Response in Different Conditions

M.K. Ghantasala1 B.O. Asimba1 A. Khaminwa1 K.J. Suthar2 D.C. Mancini3
1Department of Mechanical and Aeronautical Engineering, Western Michigan University, Kalamazoo, MI, USA
2Advanced Photon Source, Argonne National Laboratory, Argonne, IL, USA
3Physical Sciences and Engineering, Argonne National Laboratory, Argonne, IL, USA
Numerical Simulation of Recovery of Light Oil by Medium Temperature Oxidation in Porous Media

N. Khoshenvis Gargar1 A. Mailybaev2 D. Marchesin2 H. Bruining1
1Delft University of Technology, Delft, The Netherlands
2Instituto Nacional de Matematica Pura e Aplicada, Rio de Janeiro, Brazil
Numerical Simulation Study on the Heat and Mass Transfer Through Multi-Layer Textile Assemblies

S.F. Neves1 J.J.B.L.M. Campos1 T.S. Mayor2
1CEFT – Transport Phenomena Research Center, Chemical Engineering Department, Porto University, Porto, Portugal
2CeNTI - Centre for Nanotechology and Smart Materials, Rua Fernando Mesquita, Vila Nova de Famalicão, Portugal
Numerical Simulations of Methane Aromatization with and without a Ceramic Hydrogen Separation Membrane

Z. Li1 C. Kjølseth2 S. Hernandez Morejudo3 R. Haugsrud1
1University of Oslo, Department of Chemistry, FERMiO, Oslo, Norway
2Protia, Oslo, Norway
3University of Oslo, Department of Chemistry, InGAP, Oslo, Norway
Numerical Simulations of Radionuclide Transport through Clay and Confining Units in a Geological Repository using COMSOL

J. Hansmann1 M. L. Sentis1 B. J. Graupner1 A.-K. Leuz1 C. Belardinelli2
1Swiss Federal Nuclear Safety Inspectorate (ENSI), Brugg, Switzerland
2Kantonsschule Solothurn, Solothurn, Switzerland
Numerical Study of a DC Electromagnetic Liquid Metal Pump: Limits of the Model

N. Kandev1
1Institut de recherche d'Hydro-Québec, Shawinigan, QC, Canada
Optimization of Artificial Diffusion Stabilization Techniques and Corresponding Mesh Density Distribution in Drift Dominated Transport of Diluted Species

J. Jadidian1 M. Zahn1 N. Lavesson2 O. Widlund2 K. Borg2
1Massachusetts Institute of Technology, Cambridge, MA, USA
2ABB Corporate Research, Västerås, Sweden
Optimization of Thermal Properties Identification of Complex Thin Films Using MATLAB® and COMSOL Multiphysics

N. Semmar1 B. Wane1
1GREMI, UMR7344, CNRS-University of Orleans, Orléans Cedex 2, France
Optimizing the Performance of MEMS Electrostatic Comb-Drive Actuator with different Flexure Springs

S. Gupta1 T. Pahwa1 R. Bansal1 V. Bansal1 B. Prasad1 D. Kumar1
1Electronic Science Department Kurukshetra University, Kurukshetra, Haryana
Parametric Study of Heavy Oil Recovery by Electromagnetic Heating on a Horizontal Well

M. Liu1 G. Zhao1
1University of Regina, Regina, SK, Canada
Perforation Effect on a Rectangular Metal Hydride Tank for Hydriding and Dehydriding Process

E. Gkanas12 S. Makridis12 E. Kikkinides1 A. Stubos2
1Department of Mechanical Engineering, University of Western Macedonia, Kozani, Greece
2Environmental Laboratory, Institute of Nuclear Technology and Radiation Protection, NCSR 'Demokritos', Agia Paraskevi, Athens, Greece
Pore-Scale Simulation of Two-Phase Flow with Heat Transfer Through Dual-Permeability Porous Medium

H.A. Akhlaghi Amiri1 A.A. Hamouda1
1University of Stavanger, Stavanger, Rogaland, Norway
Pseudo-3D Multiphysics Simulation of a Hydride Vapor Phase Epitaxy Reactor

M. Hackert-Oschätzchen1 M. Penzel1 P. Plänitz2 A. Schubert13
1Chemnitz University of Technology, Chemnitz, Germany
2GWT-TUD, Dresden, Germany
3Fraunhofer Institute for Machine Tools and Forming Technology IWU, Chemnitz, Germany
Reactive Transport Processes in Compacted Bentonite

A.E. Idiart1 M. Pekala1 A. Nardi1 D. Arcos1
1Amphos 21, Barcelona, Spain
Reliability Enhancement of Bio MEMS based Cantilever Array Sensors for Antigen Detection System using Heterogeneous Modular Redundancy

L. S. Sundharam1
1Kumaraguru college of Technology, Coimbatore, Tamil nadu, India
Simulation and Design of an Oven for PET Blow Molding Machines

M. Mor1 C. Seneci1 V. Zacché1 C. Remino1 G. Petrogalli1 D. Fausti1
1Polibrixia, Brescia, Italy
Simulation and Fabrication of Wireless Passive MEMS Pressure Sensor

E.A. Unigarro Calpa1 D.A. Sanz Becerra1 A. Arciniegas2 F. Ramirez1 F. Segura-Quijano1
1Universidad de los Andes, Bogotá, Colombia
2Instituto Barraquer de América, Bogotá, Colombia
Simulation of Acoustic Energy Harvesting Using Piezoelectric Plates in a Quarter-Wavelength Straight-Tube Resonator

B. Li1 J.H. You1
1Southern Methodist University, Dallas, TX, USA
Simulation of Differential Ion Mobility (DMS) Principle Coupled with Mass Spectrometry in Atmospheric Pressure

F. Sinatra1 T. Wu2 A. Avila2 E. Nazarov1 T. Evans-Nguyen1 J. Wang2
1Draper Laboratory, Tampa, FL, USA
2University of South Florida, Tampa, FL, USA
Simulation Organogenesis in COMSOL: Deforming and Interacting Domains

D. Iber1 D. Menshykau1
1D-BSSE, ETH Zurich, Basel, Switzerland
Solar Cell Cooling and Heat Recovery in a Concentrated Photovoltaic System

M. Cozzini1
1Fondazione Bruno Kessler (FBK), Renewable Energies and Environmental Technologies (REET) Unit, Trento, Italy
Solving a Two-Scale Model for Vacuum Drying by Using COMSOL Multiphysics

S. Sandoval Torres1
1Instituto Politécnico Nacional, CIIDIR, Oaxaca, Mexico
The Spiral RF MEMS Switch in COMSOL Multiphysics

K. M. V. Swamy1 B. G. Sheeparamatti1 G. R. Prakash1
1Basaveshwara Engineering Collage, Bagalkot, Karnataka, India
Theoretical Investigation of CMH Lamps Ignition Properties in Ar/Hg Penning Gas Mixtures

Sz. Beleznai1 I. Maros2
1Budapest University of Technology and Economics, Budapest, Hungary
2General Electric Lighting, GE Hungary KFT, Budapest, Hungary
Theoretical Simulations of Silicon-On-Nothing (SON) Structures

C. Grau Turuelo1 B. Bergmann1 C. Breitkopf1 F. Hoffmann2 L. Brencher2
1Technische Universität Dresden, Dresden, Saxony, Germany
2Infineon Technologies GmbH, Dresden, Dresden, Saxony, Germany
Thermal Analysis of a Piezo-Disk Ultrasound Probe

L. Spicci1 M. Cati1
1Esaote, Firenze, Italy
Thermal Analysis of Packaged Deep Ultraviolet LEDs

A. Dobrinsky1 M. Shatalov1 M. Shur1 R. Gaska1
1Sensor Electronic Technology, Columbia, SC, USA
Thermo-Elastic Response of Cutaneous and Subcutaneous Tissues to Noninvasive Radiofrequency Heating

J. Jimenez-Lozano1 P. Vacas-Jacques1 W. Franco1
1Massachusetts General Hospital and Harvard Medical School, Boston, MA, USA
Thermo-Fluid Dynamics of Flue Gas in Heat Accumulation Stoves: Study Cases

D. Rossi1 P. Scotton1
1University of Padova, Department of Geosciences, Padova, Italy
Thermo-Mechanical Analysis of Composite Material Exposed to Fire

A. Davidy1
1IMI, Ramat Hasharon, Israel
Time-Dependent Thermal Stress and Distortion Analysis During Additive Layer Manufacturing, by Powder Consolidation by Laser Heating

M.S. Yeoman1 J. Sidhu2
11. Continuum Blue Ltd., Tredomen Innovation & Technology Park, Tredomen, Ystrad Mynach, United Kingdom
2BAE Systems, Advanced Technology Centre, Bristol, United Kingdom
Toward an Evaluation of the Tonal Colouring of the Japanese koto using COMSOL Multiphysics and Acoustics Module

K. Coaldrake1
1The University of Adelaide, Adelaide City, South Australia, Australia
Towards Rotordynamic Analysis with COMSOL Multiphysics

M. Karlsson1
1ÅF, Stockholm, Sweden
Two-Phase Flow and Multiphysics Simulations in COMSOL

Using COMSOL for Optimal Design of Engineering Barriers of Nuclear Waste Repositories

L.M. de Vries1 A. Nardi1 A.E. Idiart1 P. Trinchero1 J. Molinero1 F. Vahlund2 H. von Schenck2
1Amphos 21, Barcelona, Spain
2Swedish Nuclear Fuel and Waste Management, Stockholm, Sweden
Using Temperature Signals to Estimate Geometry Parameters in Fractured Geothermal Reservoirs

F. Maier1 P. Oberdorfer1 I. Kocabas2 I. Ghergut1 M. Sauter1
1Dpt. Applied Geology, Center of Geosciences, Georg-August-University, Göttingen, Germany
2Petroleum and Natural Gas Engineering Department Batman, Batman University, Batman, Turkey
Viscoelastic Mechanical Analysis for High Temperature Process of a Soda-Lime Glass Using COMSOL Multiphysics

R. Carbone1
1Material and Production Engineering Department, University of Naples “Federico II”, Naples, Italy
Wind Flow Modeling of Area Surrounding the Case Western Reserve University Wind Turbine

M. Fernandes1 D. Matthiesen1
1Case Western Reserve University, Cleveland, OH, USA
Back to top
Share it on Social Media: