The Application Gallery features COMSOL Multiphysics tutorial and demo app files pertinent to the electrical, mechanical, fluid, and chemical disciplines. You can download ready-to-use tutorial models and demo apps with step-by-step instructions for how to create them yourself. The examples in the gallery serve as a great starting point for your own simulation work.

Use the Quick Search to find tutorials and apps relevant to your area of expertise. Log in or create a COMSOL Access account that is associated with a valid COMSOL license to download the MPH-files.


3D ICP Reactor, Argon Chemistry

3D plasma modeling is possible to do in COMSOL. A square coil is placed on top of a dielectric window and is electrically excited at 13.56MHz. A plasma is formed in the chamber beneath the dielectric window, which contains Argon gas at low pressure (20 mtorr). The gas flows into the process chamber from two 2 inch ports and the gas is extracted through a single 4 inch port. The plasma is ...

DC Glow Discharge

DC glow discharges in the low-pressure regime have long been used for gas lasers and fluorescent lamps. DC discharges are attractive to study because the solution is time independent. The 1D and 2D models show how to use the DC Discharge interface to set up an analysis of a positive column. The discharge is sustained by emission of secondary electrons at the cathode.

Dielectric Barrier Discharge

This model simulates electrical breakdown in an atmospheric pressure gas. Modeling dielectric barrier discharges in more than one dimension is possible, but the results can be difficult to interpret because of the amount of competing physics in the problem. In this simple model the problem is reduced to 1D by assuming the dielectric gap is much smaller than the diameter of the plates. To ...

Inductively Coupled Plasma (ICP) torch

This model investigates the electrical and thermal characteristics of an inductively coupled plasma torch at atmospheric pressure. The discharge is assumed to be in local thermodynamic equilibrium.

Thermal Plasma

This model simulates a plasma at medium pressure (2 torr) where the plasma is still not in local thermodynamic equilibrium. At low pressures the two temperatures are decoupled but as the pressure increases the temperatures tend towards the same limit.

Atmospheric Pressure Corona Discharge

This model simulates a negative corona discharge occurring in between two co-axially fashioned conductors. The negative electric potential is applied to the inner conductor and the exterior conductor is grounded. The modeled discharge is simulated in argon at atmospheric pressure.

Drift Diffusion Tutorial

The Drift Diffusion interface solves a pair of reaction/advection/diffusion equations, one for the electron density and the other for the mean electron energy. This tutorial example computes the electron number density and mean electron energy in a drift tube. Electrons are released due to thermionic emission on the left boundary with an assumed mean electron energy. The electrons are then ...

In-Plane Microwave Plasma

Wave heated discharges may be very simple, where a plane wave is guided into a reactor using a waveguide, or very complicated as in the case with ECR (electron cyclotron resonance) reactors. In this example, a wave is launched into reactor and an Argon plasma is created. The wave is partially absorbed and reflected by the plasma which sustains the plasma.

Surface Chemistry Tutorial

Surface chemistry is often the most important and most overlooked aspect of reacting flow modeling. Surface rate expressions can be hard to find or not even exist at all. Often it is preferable to use sticking coefficients to describe surface reactions because they can be estimated intuitively. The tutorial model simulates outgassing from a wafer during a chemical vapor deposition (CVD) ...

Dipolar Microwave Plasma Source

This model presents a 2D axisymmetric dipolar microwave plasma source sustained through resonant heating of the electrons. This is known as electron cyclotron resonance (ECR), which occurs when a suitable high magnetic flux density is present along with the microwaves. This is an advanced model that showcases many of the features that make COMSOL unique, including: Infinite elements for the ...

1 - 10 of 19 First | < Previous | Next > | Last