Per page:
Search

Blog Posts Tagged Fatigue Module

Simulating Wear in COMSOL Multiphysics

August 8, 2014

A guest blogger from Veryst Engineering, a COMSOL Certified Consultant, shares how he implemented a wear model in COMSOL Multiphysics® and validated it by simulating a pin-on-disc wear test.

Stress and Fatigue in Modular Implants Used in Hip Joints

July 24, 2014

A crucial part of the design process for modular implants, such as replacement joints, is to study how the modular combination of parts will behave under dynamic loads and stresses.

Modeling Thermal Fatigue in Nonlinear Materials

May 1, 2014

2 challenges when simulating fatigue in nonlinear materials: 1.) Correctly representing the material behavior and 2.) finding a fatigue model that captures the life-controlling mechanism.

Fatigue Prediction Using Critical Plane Methods

July 22, 2013

Research on fatigue started in the 19th century, initiated following failing railroad axles that caused train accidents. In a rotating axle, stress varies from tension to compression and back to tension in one revolution. The load history is simple because it is uniaxial and proportional. Fatigue can then be evaluated with the S-N curve, also known as the Wöhler curve, which relates stress amplitude to a component’s life. In many applications we deal with multiaxiality and non-proportional loading. In this […]

Random Load Fatigue

May 30, 2013

In many applications, loads applied to structures are random in nature. The sampling results of the structural response will differ depending on the data collection time. Although the stress experienced is not always high, the repeated loading and unloading can lead to fatigue. The engineering challenges in these types of applications are defining the stress response to the random load history in the critical points, and predicting fatigue damage. This is simulated with the Cumulative Damage feature in the Fatigue […]

Infamous Failures of Fatigue

February 7, 2013

If you’ve studied structural mechanics you’re probably familiar with stories of planes falling out of the sky due to fatigue (no one wants to be the engineer who designed an airplane that crashed…). Jimmy Stewart made a famous movie about that, but different from the usual horror stories of fatigue is the accident in 1919 of a storage tank that burst in Boston, spilling molasses onto the streets at 35 mph (56 km/h). The Boston Molasses Disaster, as it’s referred […]

First Keynote Video Takes Us to Babel

November 28, 2012

One of the differences between this year’s COMSOL Conference, and previous years’, is that this year we filmed a lot of it. During the next few weeks we will be publishing some of these videos for those that were there, to enjoy it once again, and for those that weren’t to get a taste of what went on. To kick these all off, I’m proud to present the first keynote video, which takes us to Babel.

Why Should You Simulate Fatigue?

October 8, 2012

The Fatigue Module, an add-on to the Structural Mechanics Module and the COMSOL Multiphysics® software, can be used to perform structural fatigue life computations for both strain-based and stressed-based fatigue. In this blog post, we discuss some of the potential application areas and benefits of fatigue testing.


EXPLORE COMSOL BLOG