COMSOL Conference 2015

Computational Fluid Dynamics

See how researchers are using COMSOL Multiphysics to simulate fluid flow in combination with other physics, such as conjugate heat transfer, non-Newtonian fluids, microfluidics, and fluid-structure interaction (FSI), for a range of CFD applications.

2D Axisymmetric Temperature Profile Modeling of a Delayed Coking Drum During Pre-Run Warm Up

P. H. A. Valenca , A. Waturuocha , K. Wisecarver

Russell School of Chemical Engineering, University of Tulsa, Tulsa, OK, USA

3D Modeling of Hydrogen Absorption in Metal Hydride Hydrogen Storage Bottles

R. Busqué 1, R. Torres 1, A. Husar 2, J. Grau 1

1 Escola Universitària d'Enginyeria Tècnica Industrial de Barcelona, Barcelona, Spain
2 Institut de Robòtica i Informàtica Industrial CSIC-UPC, Barcelona, Spain

A 1-D Model of the 4 Bed Molecular Sieve of the Carbon Dioxide Removal Assembly

R. Coker , J. Knox

NASA Marshall Space Flight Center, Huntsville, AL, USA

A Model of Heat Transfer in Metal Foaming

Bruno Chinè 1, Valerio Mussi 2, Michele Monno 3, Andrea Rossi 2

1 School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
2 Macchine Utensili e Sistemi di Produzione, Piacenza, Italy
3 Dipartimento di Meccanica, Politecnico di Milano, Milano, Italy

A Numerical Euler-Lagrange Method for Bubble Tower CO2 Dissolution Modeling

D. Legendre , R. Zevenhoven

Åbo Akademi University, Turku, Finland

A Study on Hydrodynamics of Melt Expulsion in Pulsed Nd: YAG Laser Drilling of Titanium

S. Sharma 1, Y. Pachuary 2, S. N. Akhtar 3, J. Ramkumar 1

1 Indian Institute of Technology Kanpur, Kanpur, India
2 Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, India
3 Integral University, Lucknow, India

Advanced Multiphysics Thermal Hydraulic Models for the High Flux Isotope Reactor

P. K. Jain , J. D. Freels

Oak Ridge National Laboratory, Oak Ridge, TN, USA

Aerothermal Simulation of a Refrigerated Truck Under Open/Closed-Door Cycles

P. Namy 1, A. Oury 1, M. Youbi-Idrissi 2

1 SIMTEC, Grenoble, France
2 AIR LIQUIDE, Jouy en Josas, France

Air Bubbles Motion Through Fresh Concrete During Concreting Process

E. Chuta 1, J. Jeong 2

1 Université Paris-Est, IRC-ESTP, Cachan, France
2 IRC-ESTP, Cachan, France

Analytical Method to Evaluate EMF Induced in Ionic Liquid by Magnetic Field

S. Dasgupta 1, R. Kandasamy 1, P. Nenninger 2, F. Gotthardt 2

1 ABB Global Industries and Services Limited, India
2 ABB Automation Products GmbH, Germany

Benchmark Model: Natural Convection of Water-Aluminum Oxide Nanofluids in a Square Cavity

M. Z. Saghir 1, A. Ahadi 1, A. A. Mohamad 2

1 Department of Mechanical Engineering, Ryerson University, Toronto, ON, Canada
2 Department of Mechanical Engineering, University of Calgary, Calgary, AB, Canada

Benchmarking Tailored Formulations of Multiphase Flow in Porous Media

Á. Sainz [1,2], A. Nardi , E. Abarca , F. Grandía

1 Amphos 21 Consulting S.L., Barcelona, Spain
2 Université Toulouse III - Paul Sabatier, Toulouse, France

CAE-Based Design and Optimization of a Plasma Reactor for Hydrocarbon Processing

C. Soares , F. A. Cassini , N. Padoin

Universidade Federal de Santa Catarina, Florianópolis, SC, Brasil

CFD Analysis of a Heat Exchanger for an Electric Machine

A. Curci 1, D. Falchi 2, G. Secondo 1

1 ABB S.p.A. Italy
2 Università degli studi di Pavia, Italy

CFD Analysis of a Printed Circuit Heat Exchanger

K. Wegman , X. Sun

Department of Mechanical and Aerospace Engineering, Ohio State University, Columbus, OH, USA

CFD Modeling for the Ventilation System of a Hospital Room

A. Kermani

Veryst Engineering LLC, Needham, MA, USA

COMSOL Multiphysics® Simulation of Flow in a Radial Flow Fixed Bed Reactor (RFBR)

A. G. Dixon , D. S. Polcari , A. D. Stolo , M. Tomida

Department of Chemical Engineering, Worcester Polytechnic Institute, Worcester, MA, USA

COMSOL Multiphysics® Simulation of the Electrokinetic Effect in Gidrogeology

M. A. Narbut , K. V. Titov , P. K. Konosavsky

Saint Petersburg State University, Saint Petersburg, Russia

COMSOL Multiphysics® Software Activities Within the Research Reactors Division of Oak Ridge National Laboratory

J. D. Freels 1, P. K. Jain 1, C. J. Hurt 2, F. G. Curtis 1, M. W. Crowell 1, E. L. Popov 1

1 Oak Ridge National Laboratory, Oak Ridge, TN, USA
2 University of Tennessee, Knoxville, TN, USA

COMSOL Multiphysics® for Building Energy Simulation (BES) Using BESTEST Criteria

A.W.M. (J.) Van Schijndel , D. P. M. Jacobs

Eindhoven University of Technology, Eindhoven, Netherlands

COMSOL Multiphysics® 在热发电用真空集热管设计中的应用

赵旭山 , 郝雷 , 蒋利军 , 米菁 , 杨海龄

北京有色金属研究总院,北京,中国

Calculating the Dissipation in Fluid Dampers with Non-Newtonian Fluid Models

A. Forberger

Gamax Laboratory Solutions Ltd., Budapest, Hungary

Capillary Flows: Dynamic and Geometry Effects

D. Gosselin 1, J. Berthier 1, G. Delapierre 1, D. Chaussy 2, N. Belgacem 2

1 Department of Biotechnology, CEA/Université Grenoble-Alpes, Grenoble, France
2 LGP2, Grenoble-INP Pagora, University of Grenoble, Saint-Martin d'Hères, France

Control the Poly-Dispersed Droplet Breakup Mode in a Droplet-based Microfluidic Device by External Electric Field

Y. Li , K. Nandakumar , M. Jain

Cain Department of Chemical Engineering, Louisiana State University, Baton Rouge, LA, USA

Cooling Study of Baffles Integration in the Molding Industry

B. Noailles 1 , S. Meunier 1, V. Bruyere 2

1 RocTool, Savoie Technolac, Module R, France
2 SIMTEC, France

Cooling and Hardening during Injection Molding of Field Joint Coatings for Deep Sea Pipelines

L. Van Lokeren 1, R. Verhelle 1, S. Loulidi 1, H. Boyd 2, G. Ridolfi 2, G. Van Assche 1

1 Vrije Universiteit Brussel, Brussels, Belgium
2 Heerema Marine Contractors, Leiden, The Netherlands

Design and Simulation of MEMS Micro Heater for DNA Amplification

D. Sharma , A. Siddiqua

Nitte Meenakshi Institute of Technology, Bengaluru, Karnataka, India

Development of COMSOL-Based Applications for Heavy Oil Reservoir Modeling

S. Cambon , I. Bogdanov

Open & Experimental Center for Heavy Oil (CHLOE), University of Pau, Pau, France

Development of a Laser Cladding Process Model

F. Wirth , K. Wegener

IWF, ETH Zürich, Switzerland

Development of a RheoDSC, an Instrument for Simultaneous Rheological and Calorimetric Measurements

L. Van Lokeren 1, R. Verhelle 1, C. Block 1, P. Van Puyvelde 2, G. Van Assche 1

1 Vrije Universiteit Brussel, Brussels, Belgium
2 Catholic University of Leuven, Leuven, Belgium

Development of a Thermal Model Using COMSOL Multiphysics® Software

A. Oukaira , A. Lakhssassi

Department of Computer Science, Université du Québec en Outaouais à Hull, Gatineau, QC, Canada

Efeito da Pulsação do Ar Durante a Fluidização de Partículas de Amido de Milho

G. C. Dacanal , M. G. Thomazi , R. Ribeiro

Universidade de São Paulo, Faculdade de Zootecnia e Engenharia de Alimentos, Pirassununga, SP, Brasil

Effect of Permeability Diminution in Nutrient Diffusion in Intervertebral Disc

M. A. Chetoui 1, O. Boiron 2, A. Dogui 3, V. Deplano 2

1 Université de Monastir, Ecole Nationale D'ingénieurs de Monastir; Ecole centrale Marseille, Marseille, France
2 Aix-Marseille Université, CNRS, Ecole Centrale, Marseille, France
3 Université de Monastir, Ecole Nationale D'ingénieurs de Monastir, Marseille, France

FEM Convergence for PDEs with Point Sources in 2-D and 3-D

M. Gobbert 1, K. M. Kalayeh 2, J. S. Graf 1

1 Department of Mathematics and Statistics, University of Maryland - Baltimore County, Baltimore, MD, USA
2 Department of Mechanical Engineering, University of Maryland - Baltimore County, Baltimore, MD, USA


Fluid Flow Modeling in a Bioreactor Applied to Wine Production

C. Soares 1, N. Padoin 1, P. M. Aballay 2, O. A. Ortiz 2

1 Universidade Federal de Santa Catarina, Florianópolis, SC, Brazil
2 Universidad Nacional de San Juan, San Juan, Argentina

Fluid Motion Between Rotating Concentric Cylinders Using COMSOL Multiphysics® Software

P. L. Mills , K. Barman , S. Mothupally , A. Sonejee

Texas A&M University - Kingsville, Kingsville, TX, USA

Friction Factor for Perforated Pipes

D. Neihguk 1, M. L. Munjal 2, A. Prasad 1

1 Mahindra & Mahindra Ltd, Chennai, India
2 Indian Institute of Science, Bangalore, India

High-Resolution FSI Modeling of a High-Aspect Ratio Involute Flow Channel in the HFIR at ORNL

A. I. Elzawawy 1, J. D. Freels 2, F. G. Curtis 2, 3

1 Vaughn College of Aeronautics and Technology, East Elmhurst, NY, USA
2 Oak Ridge National Laboratory, Oak Ridge, TN, USA
3 University of Tennessee, Knoxville, TN, USA

Hydrodynamic Modeling of a Rotating Cone Pump Using COMSOL Multiphysics® Software

P. L. Mills , A. Uchagawkar , M. Vasilev

Texas A&M University - Kingsville, Kingsville, TX, USA

Hydrodynamics and Mass Transfer in Taylor Flow

F. L. Durán Martínez 1, A. M. Billet 1, C. Julcour-Lebigue 1, F. Larachi 2

1 Toulouse University, Toulouse, France
2 Laval University, Quebec, Canada

Hydrodynamics of Viscoelastic Jets in Extensional Flow

S. Kulkarni , V. Juvekar

Indian Institute of Technology Bombay, Mumbai, India

Impact of Electro-Convection (EC) on Heat Transfer in Liquid-Filled Containers

A. Pokryvailo

Spellman High Voltage Electronics Corporation, Hauppauge, NY, USA

Implicit Large Eddy Simulations of 2D Flow and Heat Transfer in Thermoacoustic Resonators

N. Martaj [1,2], S. Savarese [3], S. Kouidri [3], M. M. ALI [4,5]

1 EPF Ecole d’ingénieurs, Montpellier, France
2 Institut d'Electronique et des Systèmes, Université de Montpellier, Montpellier, France
3 Armélio, Les Ulis, Courtabœuf, France
4 LIMSI-CNRS, Orsay, France
5 UPMC Univ Paris 06, Paris, France

Integration of the DeProF Model for Two-Phase Flow in P.M. into the Subsurface Flow Module

M. S. Valavanides 1, E. D. Skouras 2, A. N. Kalarakis 3, V. N. Burganos 2

1 TEI Athens, Athens, Greece
2 FORTH/ICE-HT, Patras, Greece
3 TEI of Western Greece, Patras, Greece

Iterative Learning Control for Spatio-Temporal Repetitive Processes

D. Kowalów , M. Patan

Institute of Control & Computation Engineering, Zielona Góra, Poland

Keyhole Behavior During Spot Laser Welding

V. Bruyere 1, C. Touvrey 2, P. Namy 1

1 SIMTEC, Grenoble, France
2 CEA DAM, Is-sur-Tille, France

MCA 动脉瘤血流动力学分析

刘孟杰 1, 付芳芳 2, 李萌 1

1 郑州大学,郑州,河南,中国
2 郑州大学附属省人民医院,郑州,河南,中国

Mechanistic Modeling of Non-Spherical Bacterial Attachment on Plant Surface Structures

A. Warning , A. K. Datta

Cornell University, Ithaca, NY, USA

Modeling Conventional Swing of a Cricket Ball

R. Latchman , A. Pooransingh

University of the West Indies - St. Augustine, St. Augustine, Trinidad and Tobago

Modeling Microwave Heating During Batch Processing of a Liquid Sample in a Single Mode Cavity

S. Curet , F. Bellicanta Begnini , O. Rouaud , L. Boillereaux

L’UNAM Université, ONIRIS, CNRS, GEPEA, Nantes, France

Modeling Transient Adsorption/Desorption Behavior in a Gas Phase Photocatalytic Fiber Reactor

S. Denys , J. Van Walsem

Sustainable Energy, Air & Water Technology, Department of Bioscience Engineering, University of Antwerp, Belgium

Modeling a DC Plasma Torch with COMSOL Multiphysics® Software

Bruno Chine' 1, Manuel Francisco Mata 2, Ivan Vargas 3

1 School of Materials Science and Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
2 School of Electromechanics Engineering, Costa Rica Institute of Technology, Cartago, Costa Rica
3 School of Physics, Costa Rica Institute of Technology, Cartago, Costa Rica

Modeling an Ejector for Hydrogen Recirculation in a PEM Fuel Cell

X. Corbella 1, R. Torres 2, J. Grau 2, M. Allué 3

1 Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona (Universitat Politècnica de Catalunya), Barcelona, Spain
2 Fluid Mechanics Department (Escola Universitària d’Enginyeria Tècnica Industrial de Barcelona - Universitat Politècnica de Catalunya), Barcelona, Spain
3 Institut de Robòtica I Informàtica Industrial (Consejo Superior de Investigaciones Científicas – Universitat Politècnica de Catalunya), Barcelona, Spain

Modeling and Simulation of Hydration Operation of Date Palm Fruits Using COMSOL Multiphysics

S. Curet 1, A. Lakoud 2, M. Hassouna 2

1 L’UNAM Université, ONIRIS, CNRS, GEPEA, Nantes, France
2 Ecole Supérieure des Industries Alimentaires de Tunis, Tunis El Khadra, Tunisie

Modeling of Non-isothermal Reacting Flow in Fluidized Bed Reactors

V. Orava 1, O. Souček 2, P. Cendula 1

1 Institute of Computational Physics, ZHAW, Winterthur, Switzerland
2 Faculty of Mathematics and Physics, Charles University in Prague, Prague, Czech Republic

Modeling of Stockton University Geothermal System Using COMSOL Multiphysics® and the Subsurface Flow Module

M. Sharobeam , S. Pal , G. Villanuna

School of Natural Sciences and Mathematics, Stockton University, Galloway, NJ, USA

Modeling of Straight Jet Dynamics in Electrospinning Process

R. Pandya 1, A. Kumar 2, V. Runkana 1

1 Tata Research Development and Design Centre, Tata Consultancy Services, Pune, India
2 Indian Institute of Technology, Delhi, India

Modeling of Transport Phenomena in Laser Welding of Steels

A. Métais 1, S. Matteï 2, I. Tomashchuk 2, S. Gaied 1

1 ArcelorMittal, Montataire, France
2 Laboratoire Interdisciplinaire Carnot de Bourgogne, Université Bourgogne Franche Comté, France

Modeling of a Multilayered Propellant Extrusion in Concentric Cylinders

S. Durand 13, C. Dubois 1, P. Lafleur 1, V. Panchal 2, D. Park 2, P. Paradis 3, D. Lepage 3

1 École Polytechnique de Montréal, Montréal, QC, Canada
2 US Army ARDEC, Picatinny Arsenal, NJ, USA
3 General Dynamics OTS Canada Valleyfield, Salaberry-de-Valleyfield, QC, Canada

Multi-Dimensional Simulation of Flows Inside Mono and Polydisperse Packed Beds

R.G. Schunk , J. C. Knox , K. Son [1, 2], R. F. Coker

1 NASA Marshall Space Flight Center, Huntsville, AL, USA
2 Purdue University, West Lafayette, IN, USA

Multiphase Laminar Flow with More Than Two Phases

W. T. Vetterling

Zink Imaging, Inc., Billerica, MA, USA

Multiscale Resin Impregnation Modeling in a Bidirectional Composite Laminate

G. Salkar , B. Kr Mishra , M. Jayaraman , S. Manian

National Centre for Aerospace Innovation and Research, Mumbai, India

Natural Convection around Horizontal Cylinders subjected to Non-uniform Heating

I. Khan

University of Central Lancashire, Preston, United Kingdom

Natural Refrigeration System Design

A. Prasad , O. K. Sacks , R. C. Thiagarajan

ATOA Scientific Technologies, Bengaluru, India

Numerical Analysis of the Flow Structure in the Continuous Casting Two-strand Tundish

M. Warzecha 1, J. Jowsa 1, A. M. Hutny 1, P. Warzecha 1, T. Merder 2

1 Czestochowa University of Technology, Czestochowa, Poland
2 Silesian University of Technology, Katowice, Poland

Numerical Simulation of Auto-Propulsion Mechanism of Microorganism Inside a Microchannel

S. Patra 1, A. Dalal 1, G. Biswas 1, S. Shah 2

1 Indian Institute of Technology Guwahati, Guwahati, Assam, India
2 Indian Institute of Technology Bhubaneswar, Bhubaneswar, Odisha, India

Optimization of Welding Parameters using 3D Heat and Fluid Flow Modeling of Keyhole Laser Welding

S. Gaied 1, M. Courtois 2, M. Carin 2, P. Le Masson 2

1 ArcelorMittal Global R&D, Montataire, France
2 LUniv. Bretagne-Sud, Lorient, France

Parametric Investigation of the Common Geometry Shapes for Added Mass Calculation

J. H. Lee , A. Koushesh

American University of Sharjah, United Arab Emirates

Pneumo-Hydrodynamic Droplet Generation

V. Mamet 1, P. Namy 2, N. Berri 1, L. Tatoulian 1, P. Ehouarn 1, V. Briday 1, P. Clemenceau 2, B. Dupont 1

1 DBV Technologies, Bagneux, France
2 SIMTEC, Grenoble, France

Predicting the Transformation of a Liquid Food Product within a Tubular Heat Exchanger

A. Plana-Fattori , E. Auger , C. Doursat , D. Flick

AgroParisTech, Paris, France

Preliminary Study of Particle Trajectory and Secondary Flow in Bend Configurations to Reduce Erosion

O. Ayala 1, A. Arruda 2, L. Calembo 2, E. Enes 2, D. Monteiro 2, R. Paizante 2, A. Rocha 2, M. Simões 2, J. Michaeli 1

1 Department of Engineering Technology, Old Dominion University, Norfolk, VA, USA
2 Brazil Scientific Mobility Program, CAPES, Brasilia, DF, Brazil

Scattering of mm-Waves by Turbulent Structures in Magnetically Confined Fusion Plasmas

O. Chellaï , S. Alberti , I. Furno , T. Goodman , M. Baquero

Centre de Recherches en Physique des Plasmas, Ecole Polytechnique Fédérale de Lausanne, Suisse

Simulation and Verification of Bionic Heat Exchangers with COMSOL Multiphysics® Software

A. Kremers , M. Pieper

Applied University Aachen, Aachen, Germany

Simulation of Constant-Volume Droplet Generators for Parallelization Purposes

D. Conchouso 1, A. Arevalo 1, D. Castro 1, Y. Ying 1, I. G. Foulds 2

1 King Abdullah University of Science and Technology, Thuwal, Makkah, Saudi Arabia
2 School of Engineering, University of British Columbia - Okanagan, Vancouver, BC, Canada

Simulation of Flow in a Rectangular Channel of a PEM Fuel Cell

A. L. R. Paulino 1, E. Robalinho 2, E. F. Cunha 1, M. Linardi 1, R. R. Passos 3, E. I. Santiago 1

1 Instituto de Pesquisas Energéticas e Nucleares – IPEN/CNEN, São Paulo, SP, Brazil
2 Instituto de Pesquisas Energéticas e Nucleares – IPEN/CNEN, São Paulo, SP, Brazil; and Instituto Federal do Rio Grande do Sul – IFRS, Porto Alegre, RS, Brazil
3 Universidade Federal do Amazonas – UFAM, Manaus, AM, Brazil

Simulation of Spiral-Tube Heat Exchangers in COMSOL Multiphysics® Software

K. O. Lund 1, S. M. Lord 2

1 Kurt Lund Consulting (COMSOL Certified Consultant), Del Mar, CA, USA
2 SML Associates, Encinitas, CA, USA

Simulation of Supercritical Fluid Extraction Process

P. Katiyar , S. Khanam

Indian Institute of Technology Roorkee, Roorkee, Uttarakhand, India

Simulation of Yield-Stress Fluid in a Rotational Rheometer: The Effect of Vane Geometry on the Accuracy of Measured Properties

J. Park 1, A. M. Oliva 1, N. R. Hargrave 1, D. Feys 2

1 Department of Chemical and Biochemical Engineering, Missouri University of Science & Technology, Rolla, MO, USA
2 Department of Civil, Architectural & Environmental Engineering, Missouri University of Science & Technology, Rolla, MO, USA

Simulation of a Downsized FDM Nozzle

T. M. Hofstaetter

Vienna University of Technology, Vienna, Austria

Simulation of a Nozzle in a Borehole

E. Holzbecher 1, F. Sun 2

1 German University of Technology in Oman, Muscat, Oman, Germany
2 Georg-August-Universität, Göttingen, Germany

Simulação Fluidodinâmica de um Digestor Contínuo para Produção de Celulose.

I. Neitzel , R. Kreczkiuski

FATEB, Telemaco Borba, Paraná, Brasil

Single Phase Flow Models in Fractal Porous Media Using a Fractal Continuum Mechanics Approach

E. Linares-Pérez , M. Díaz-Viera [1, 2]

1 Instituto de Geofísica, Universidad Nacional Autónoma de México, Coyoacán, DF, México
2 Instituto Mexicano del Petróleo, Ciudad de México, DF, México

Study of Electrochemically Generated Two-Phase Flows

J. Schillings 1, O. Doche 2, J. Deseure 1

1 LEPMI, Grenoble, France
2 SIMAP, Grenoble, France

Studying PEM Fuel Cells using Equation Based Simulation

J. Blackburn , N. McCartney

National Physical Laboratory, London, UK

The Analysis of the Conditions of Flow in the Tundish Performed by a Numerical and Physical Method

T. Merder 1, J. Jowsa 2, A. M. Hutny 2, J. Pieprzyca 1, M. Warzecha 2

1 Silesian University of Technology, Katowice, Poland
2 Czestochowa University of Technology, Czestochowa, Poland

The Virtual Aquarium: Simulations of Fish Swimming

M. Curatolo 1, L. Teresi 2

1 Department of Engineering, Università Roma Tre, Roma, Italy
2 Department of Mathematics and Physics, Università Roma Tre, Roma, Italy

Topology Optimization of Thermal Heat Sinks

J. H. K. Haertel 1, K. Engelbrecht 1, B. S. Lazarov 2, O. Sigmund 2

1 Technical University of Denmark, Roskilde, Denmark
2 Technical University of Denmark, Kgs. Lynby, Denmark

Transient Model of a Fluorine Electrolysis Cell

J. Vukasin 1, I. Crassous 1, B. Morel 1, J. Sanchez-Marcano 2, P. Namy 3

1 HRP, AREVA NC, France
2 Institut Européen des Membranes - CNRS, France
3 Simtec, France

Two-phase Flow Calculations in Pore Unit Cells Implementing Mixed FEM/Lattice-Boltzmann Simulators

E. D. Skouras 12, A. N. Kalarakis 2, M. S. Valavanides 3, V. N. Burganos 1

1 Foundation for Research and Technology, Hellas/Institute of Chemical Engineering Sciences, Patras, Greece
2 Dept of Mechanical Engineering, TEI of Western Greece, Patras, Greece
3 Dept of Civil Engineering, Applied Mechanics Laboratory, TEI of Athens, Athens, Greece

Uncertainty Quantification: What it is and Why it is Important for Multiphysics Simulations

P. Qian [1, 2]

1 University of Wisconsin - Madison, Madison, WI, USA
2 SmartUQ, Madison, WI, USA

Virtual Functional Product Development of a µ-Methane Steam Reformer

T. J. Kazdal , M. J. Hampe

Technische Universität Darmstadt, Darmstadt, Germany

Virtual Modeling of Thermo-Physiological Comfort in Clothing

P. Van Ransbeeck , R. Benoot , B. Van Der Smissen

University College Ghent, Faculty of Science and Nature, Department of Mechatronics, Belgium

基于 COMSOL 的 Ion-Filter ICP 腔室仿真

韩传锟 1, 程嘉 2, 路益嘉 2, 杨义勇 1

1 中国地质大学(北京),北京,中国
2 清华大学,北京,中国

平板膜浓差极化过程的有限元仿真分析

徐佩锋 12, 杨宁 1

1 江苏大学,镇江,江苏,中国
2 江苏农林职业技术学院,句容,江苏,中国

激光熔覆过程中的传热传质研究

甘政涛

中国科学院力学研究所,北京,中国


ISBN: 978-0-9910001-2-8
ISSN: 2372-2215