Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

Reading Deformation graph

Please login with a confirmed email address before reporting spam


I am getting a coloured graph for deformation in microgripper.
Now I want to get the values of deformation at different point(x,y,z) (instead of graph)

please let me know how to get that in comsol.

3 Replies Last Post Jan 7, 2013, 2:24 a.m. EST
Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 2, 2013, 3:29 a.m. EST
Hi

3D or 2D color views are not relaay there to do measurements but to give nice views, to get a eformation, its better to use line graphs along an edge or a "data set - cut line" and ask for the displacement u,v,w or disp

In 2D views you can set contour gaph ontop or you can add the "more - minmax points" on your graph

If you are new to COMCOL its worth to play several of the video presentationson the main site, there are many trics too learn, and use the help ;) i.e. "results" video

--
Good luck
Ivar
Hi 3D or 2D color views are not relaay there to do measurements but to give nice views, to get a eformation, its better to use line graphs along an edge or a "data set - cut line" and ask for the displacement u,v,w or disp In 2D views you can set contour gaph ontop or you can add the "more - minmax points" on your graph If you are new to COMCOL its worth to play several of the video presentationson the main site, there are many trics too learn, and use the help ;) i.e. "results" video -- Good luck Ivar

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 7, 2013, 1:04 a.m. EST
Hi Ivar,
Thanks for reply....

Actually I have checked videos available on comsol website but i didnt get anything related to generate a graph or table from simulation.
please share any document or procedure regarding that.Meanwhile i will be finding out in comsol help documentation
Hi Ivar, Thanks for reply.... Actually I have checked videos available on comsol website but i didnt get anything related to generate a graph or table from simulation. please share any document or procedure regarding that.Meanwhile i will be finding out in comsol help documentation

Ivar KJELBERG COMSOL Multiphysics(r) fan, retired, former "Senior Expert" at CSEM SA (CH)

Please login with a confirmed email address before reporting spam

Posted: 1 decade ago Jan 7, 2013, 2:24 a.m. EST
Hi

sure you do not find your solution in one of these ?

www.comsol.eu/video/167/
www.comsol.eu/video/371/
www.comsol.eu/video/375/
www.comsol.eu/video/395/
www.comsol.eu/video/397/
www.comsol.eu/video/425/
www.comsol.eu/video/427/
...
--
Good luck
Ivar
Hi sure you do not find your solution in one of these ? http://www.comsol.eu/video/167/ http://www.comsol.eu/video/371/ http://www.comsol.eu/video/375/ http://www.comsol.eu/video/395/ http://www.comsol.eu/video/397/ http://www.comsol.eu/video/425/ http://www.comsol.eu/video/427/ ... -- Good luck Ivar

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.