Discussion Closed This discussion was created more than 6 months ago and has been closed. To start a new discussion with a link back to this one, click here.

LES simulation for high Mach Number flow.

Please login with a confirmed email address before reporting spam

I am trying to perform LES simulation for high mach flow (0.9). I am using comsol 5.5 version. The problem is, default "Single Phase Terbulant LES" physics only perform simluation for mach flow < 0.3. Also "High Mach number flow" Physics have Rans k-w model and there is no LES terbulant model in it. LES Terbulant simulation for 0.9 mach number is possible in COMSOL multiphyics? if yes please let me know how?

Thanks in advance.


1 Reply Last Post Oct 17, 2020, 11:56 a.m. EDT

Please login with a confirmed email address before reporting spam

Posted: 3 years ago Oct 17, 2020, 11:56 a.m. EDT

Same problem. I want to do a SST model. But it is not available with High Mach Number Module.

I wanted to know is it possible to make our own High Mach Number Module by adding Turbulence flow module and Heat transfer. I think it will solve all the same equations. Please correct me if I'm wrong.

Same problem. I want to do a SST model. But it is not available with High Mach Number Module. I wanted to know is it possible to make our own High Mach Number Module by adding Turbulence flow module and Heat transfer. I think it will solve all the same equations. Please correct me if I'm wrong.

Note that while COMSOL employees may participate in the discussion forum, COMSOL® software users who are on-subscription should submit their questions via the Support Center for a more comprehensive response from the Technical Support team.